Manufacturer: Nissan Tanaka
Model: LAB2

S-LABOⅡ LAB2

Exterior Diagram

Features

• Optimal for use with standard gas, zero gas, and high-purity gas:
  Utilizes a stainless steel diaphragm to reduce external leakage and maintain purity.
  Equipped with an internal filter to reduce internal leakage.
• Stable supply of low-flow rates is possible thanks to a two-stage pressure reduction structure.
• Supply pressure remains constant even when the cylinder pressure changes due to very small pressure fluctuation characteristics.
• We have 8 models in stock to meet your urgent needs.
  If the desired product is not in stock, we will propose solutions such as adapter fittings. Please feel free to consult with us.

Specifications

Model		LAB2
Main Material of Gas Contact Parts		Main Body/C3604, Diaphragm/SUS316L Others/C3604, PCTFE, PTFE, Buna-N, etc
Usage Pressure Range	Inlet Side (P1)	1.5～15
	Outlet Side (P2)	0.25MPa gauge：0.02～0.15
		1.0MPa gauge：0.02～0.6
Weight		Approximately 2.0kg (LAB2-1414V)
Flow rate L/min(nor) N2 gas		200 P1=8MPa, P2=0.6MPa

※ Please note that as the maximum operating pressure on the outlet side is 0.6 MPa, a 1.5 MPa gauge cannot be installed.

Compatible Gases

O₂, N₂, Ar, Air, H₂, He, CO_2(※)(※2), Ne, Kr, Xe, CH_4(※), C₂H₆, C₃H₈, CH₂=CHCH₃, CH₃C≡CH, CH₂=C=CH₂, C₃H₆, C₄H₁₀, CH(CH₃)₃, CH₃CH₂CH=CH₂, CH₂=CHCH=CH₂,  C₅H₁₂, C₆H₁₄, C₆H₁₂, CCl₃F, CClF₃, CBrF₃ and other insert gases.
※: Please use at or below 1L/min (normal)
※2: If frequent opening and closing is repeated at a high frequency due to solenoid valves or similar devices, we recommend the use of the nylon sheet specification. As it is a specialized product, please place an order through S-LABO made of stainless steel (SUS) or TORR regulators.

For inquiries regarding the usability of gases not listed in this table, please contact our company.

Product lineup

Product Name	Primary-side pressure gauge	Secondary-side pressure gauge	Inlet joint	Outlet joint	Outlet valve	Notes
LAB2-1514V	25MPa	1.0MPa	W22-14 right female socket	M16×1.5 right male	with needle valve
LAB2-151X			W22-14 right female socket	Rc1/4	None	exit-free specification
LAB2-152X			W22-14 left female socket	Rc1/4	None	exit-free specification
LAB2-153X			20.9-14 left	Rc1/4	None	exit-free specification
LAB2-1814V		0.25MPa	W22-14 right female socket	M16×1.5 right male	with needle valve
LAB2-181X			W22-14 right female socket	Rc1/4	None	exit-free specification
LAB2-182X			W22-14 left female socket	Rc1/4	None	exit-free specification
LAB2-183X			20.9-14 left	Rc1/4	None	exit-free specification

Accessory

S-LABO Flow Meter (Made-to-Order Product)

This is a flow meter designed exclusively for the S-LABO series. In addition to the standard lineup, it can be individually designed based on the type of gas and pressure requirements.
※ To connect with S-LABOⅡ LAB2, you will need NPT1/4 to R1/4 adapter fittings. Please order them together.

Needle Valve LAB-FR-V (Regular Stock Item)

This is a needle valve designed for use with S-LABO.

⚠️Warning: To use it correctly, please be sure to read the ‘Instruction Manual’ carefully before use.

This product may change specifications and other details without prior notice for improvement purposes.

---

Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka