Product Made in Japan
Manufacturer: Okabe
Model: A30-0010

Tying hardware for scaffolding & wall

Application

• To prevent scaffolding overturn
• To prevent scaffolding buckling

Allowable load: Tensile and compression: 4.41kN (450kgf)

Features

• IVY thread of the adjusting bolt which has twice larger pitch than the conventional thread is a key tech to effectiveness.
• IVY thread also makes it easier to remove concrete from the adjustment bolt.
• Long Top bolt provides easy finishingwork with mortar, tiling, or anything.
• Variety of sizes can be offered (Type A).
• Top bolt can be rotated independently from Body, which provides removal work extremely easier (type G).
• The totatable top bolt of type G enables the angled fastening.

Cautions

• Screw the top bolt into the insert all the way.
• Tighten the bolt of the clamp with a tightening torque of 3.43~4.41kN・ cm (350~450kgf・cm).
• When attaching the clamp to (orremoving the clamp from) the upright post of the scaffolding, use a dedicated tool such as a ratchet spinner, and do not hit the bolt with a hammer, etc.
• To attach or remove the top bolt, use a ratchet spanner or form tie spanner (type G).
• Attach the product at right angles to the building as much as possible. When it is difficult due to the structure or location of the building, make a connection using a pipe, etc.
• Use Wall-Tie Insert (A20-0010~30) as an insert on the wall side.
• Do not use the product for any purpose other than using it as hardware to connect scaffolding and wall (e.g. placing a scaffolding walk board on the product).
• Be sure to use the keeper within the allowable load.

Compression & tensile: 8.83kN or more.