Product Made in Japan
Manufacturer: Okabe
Model: B90-0710

L-shaped fastening hardware for column panel (metal form)

Panel Fastener I” fastens hardware developed for independent columns for construction and civil engineering projects. It does not require separators. The high-strength hardware can reduce the number of stages of horizontal form supporting members. While single columns can be used, systemized columns can further streamline construction projects.

Features
● The high strength hardware can reduce the number of stages of horizontal form supporting members. Separators are not required because of the outside tightening method. Applicable for the column size of 700mm~ 1,300mm (also applicable for rectangle columns).
● Assembly and disassembly of formwork is easy just by bolt-up of the corners.
● By using this hardware with fasten metalforms, the formwork can be lifted and moved, which enhances work efficiency.

[Hanger S]

[Holder W]

[Corner tightening part]

[Panel Fastener Ⅰ]

◆Work procedures
(1) Erect metalforms by fastening with U clips.
(2) Arrange and fasten holders the designated positions (8 positions/stage) (2 positions/face).
(3) Open the product into an L-shape and attach hexagon head bolts and taper pins according to the size of the product (when shipped, it is set for the column size of 1,300mm).
(4) Place the product on holders and fasten them.
(5) After temporarily tightening the product with corner tightening hardware, adjust plumbing and tighten the product completely.

For a rectangular column, make arrangements so that the receiving hardware will come on the long side, and set the products.
* If the corner is round, please consult us.

● Necessary tools
● Ratchet spanner
　 Distance between the parallel sides: 21mm
　 Tightening Powder Holders
　 Distance between the parallel sides: 30mm
　 Tightening corners
● Hammer
　 U Clips