Model: OSC77FD100HB
Features
– This is a basic unit which provides water supply and volumetric measurement services for use in conjunction with accessories for specific experiments
– The benchtop is molded into a measuring tank and a channel
– Water is admitted at one end of the channel via a quick coupling for connection to an accessory which is mounted acorss and discharges water into the channel
– The open channel discharges water into the measuring tank which inturn discharges water to ma main storage tank and can be drained by a bottom valve
– Both benchtop and storage tanks are made of fiberglass
– The measuring tank is stepped to enable accurate measurement of both high and low flow rates
– A level gauge at the side of the bench is provided for measurement of volume in the measuring tank
– A bull’s eye level is provided to indicate the bench level
Specifications
Model |
OSC 77FD 100HB |
Pump |
0.37kW centrifugal pump with a maximum flow rate over 80Lpm and a maximum head over 18m water |
Bench top dimension |
1360mm long x 770mm wide |
Open channel |
750mm long x 250mm wide x 170mm deep |
Measuring tank |
Low flow 101, High flow 451 |
Main storage tank |
165L |
Power supply |
220V, 1Ph, 50Hz. Other power supply is available on request |
Size |
Approx. 780 x 1360 x 1050mm |
Weight |
Approx. 111kg |
Optional Accessories
001HB |
Bench leveling screws |
002HB |
Two side level gauges are provided instead of one. The second level gauge measures the level in the channel. Thus flow over a notch experiment can be run without using hook and point gauge. |
003HB |
Variable speed pump with a control panel instead of a fixed speed pump |
005HB |
Measuring tank stilling baffle |
006HB |
Full-length storage tank with capacity 250L instead of the short storage tank |
007HB |
0.37kW submergible pump with flow rate over 150Lpm instead of centrifugal pump |
011HF |
Variable area flowmeter, up to 75Lpm to facilitate the experiments |
011-120HF |
Variable area flowmeter, 20-150Lpm |
001HP |
Pump motor if replaced by 0.55kW motor dynamometer with an inverter, a digital speed indicator and a spring balance for the measurement of pump input, and pressure gauges for measurement of output |