Field Equipment, Japan
OSC77FD211TH Shell and Tube Heat Exchanger
Model: OSC77FD211TH
Features
– The apparatus is used for studying heat transfer through a shell and tube heat exchanger under parallel or counter flow conditions
– The unit consists of a shell and tube heat exchanger, hot water tank with a transfer pump, instruments for monitoring and control
– Parallel and counter flow is selected by cold water control valves
Typical Experiments
– Study of heat transfer under parallel and counter flow at various rates of flow and temperature differences
– Heat transfer coefficient at various rates of flow and temperature differences
Specifications
Model | OSC 77FD 211TH | |||||||
Construction | Insulated stainless steel shell with 7 stainless steel inner tubes | |||||||
Total heat transfer area over 600cm2 | ||||||||
Temperature sensor | 4 ea for hot and cold water inlets and outlets | |||||||
1 ea for hot water tank | ||||||||
A service module | A hot water pump | |||||||
A stainless steel hot water tank with a level switch to prevent heater operation | ||||||||
if the level is too low | ||||||||
Heater: 3000W | ||||||||
2 sets of temperature indicator with selector switch | ||||||||
Temperature control unit to limit temperature of hot water to not more than 80℃ | ||||||||
Flow meters : Hot water 0.4 to 4L/m, Cold water 1 to 7L/m | ||||||||
Power supply | 220V 1Ph 50Hz. Other power supply is available on request | |||||||
Size (W x L x H) | Approx. 650 x 1400 x 650 mm | |||||||
Weight | Approx. 65 kg |