Japan, Royal Master
Royal Master 1150SW Hydraulic Pump Unit – Hydraulic Puncher Share
Made in Japan
Manufacturer: Royal Master
Model: 1150SW
Feature
All units, from small, lightweight models to powerful types, are chosen by our customers for their excellent operability.
Standard models are used to punch long holes. Long hole bits are also standardized and we have a large inventory. *
Combined with Royal’s powerful double-acting hydraulic pump, these punching machines punch holes quickly, accurately, safely and quietly. **
The new 506NSW, a chisel for small section steel, with a 5｡ taper for channel steel is standard in stock.
*Long holes are an option for 1150SW only.
** The noise is generated when the steel material is very hard.
Technical note:
When making holes with these punches, the hole diameter should be larger than the material thickness (SS400).
Specifications
| Maximum capacity | 1000kN (100 tons) |
| Maximum capacity (ss400) | 30×25 32×23 |
| Stretch | 150mm |
| Weight | 120kg |
| Use hydraulic pump | 70Mpa(720kgf/cm2) Double-acting type |
| Accessory | 22, 24, 28, 30 |
Maximum punching speed (Classified by pump/punch combination)
| awl | 1150SW | ||
| Time (seconds) | Punch | Return | |
Hyd. pump | D-3SW | 6.5 | 3.8 |
| D-2SW | 10.0 | 6.0 | |
| D-1SW | 13.5 | 6.0 | |
| 1SW-40 | — | — | |
Related Products
-
Super Tool KP17-55 Offset Wrench (With Corn Shaped Spear, 60° Type)
-
Kokosha PJC2 Series ISO Side Scuttles Bolted Type (JIS Equivalent)
-
OSC 92TH320 Barria Pak (UN Standard Transportation Container)
-
Hammer Caster 440G/440R 65-125mm Caster
-
SAKUSAKU SM-2M-D Carbide Rotary Burr Pointed End Cone Shape
-
Shinano SI-2501 Rotary Switch Type Disc Grinder Standard Air Tools
