Japan, Senyo
Senyo PCH-13/PCH-20 Manual Hydraulic Type PC Cutter
Product Made in Japan
Manufacturer: SENYO Co., LTD
Model: PCH-13/PCH-20
PC Cutter PCH-13 / PCH-20 [Manual Hydraulic Type]
Wire rope cutter used exclusively for PC wire and piano wire
“PCH-13 / PCH-20” is a manual hydraulic wire rope cutter.
This cutter is exclusively for PC wire and piano wire, and is widely used in that industry.
| Format | PCH-13 type | PCH-20 type |
|---|---|---|
| Cutting Capacity | φ13mm | φ20mm |
| Output | 140KN (14TON) | 270KN (27TON) |
| Discharge pressure | Max.70MPa (700kgf/cm2) | Max.70MPa (700kgf/cm2) |
| Weight | 15kg | 20kg |
| Size | W970mm×D160mm×H210mm | W1,120mm×D170mm×H250mm |
Related Products
-
Fujii Denko TS-93-311 Harness & Lanyard
-
KONAN RV6-G 0 to 0.04MPa Regulators
-
Motoyuki UT-180W For Steel Cutting
-
Ross Asia Miniature series Port sizes 1/8″ and 1/4″. Flow rates up to 24 scfm (680 l/min)
-
Horiuchi Accessories Compact Type Cylinder CHR Series
-
Organo Vertical Shaft Mechanical Aeration System for Orlotor System Oxidation Ditch
REQUEST QUOTATION
PAYMENT
LINK
