Product Made In Japan
Manufacturer: TASETO
Model: Color Check

TASETO COLOR CHECK is a Penetrant testing material that is widely used in the inspection of surface discontinuities of Welds, Forgings, Pressure Vessels, Casting, General Metal Work, Power Plant Construction, and Leak Testing.

Pre-cleaning	Penetrant application	Removal of excess penetrant	Developing	Interpretation
Remove oil, grease and dirt off the test surface with the remover to let flaws open, and then dry the surface well.	Apply the penetrant over the test surface. Dwelling time is in the range of 5 to 60 minutes.	Wipe off excess penetrant with a cloth dampened with the remover. If you use the water washable penetrant, spray shower water.	Apply a thin coat of the well-agitated developer to the test area. Development time is between 10 to 30 minutes.	Find a flaw indication after the developer has dried.

Standard：

TASETO Color Check standard type meets the requirements of the following standard.
・ MIL-I-25135E／AMS-2644
・ JIS Z2343-2／ISO 3452-2
・ MIL-STD-6866
・ ASTM 1417
・ ASME Boiler & Pressure Vessel Code, Section Ⅴ、Article 6

Coating area：
（Estimates）

The

*The wiping area of the remover differs largely depending on how it is applied.

● Packing units：

420ml Aerosol cans、4-L or 18-L can