,

Tohnichi FD/FDD Direct Reading Torque Wrench

Made in Japan
Manufacturer: Tohnichi
Model: FD/FDD

Transmits tightening torque data wirelessly at the click moment. Pass/fail judgment is known close at hand, providing excellent workability. The FDD’s double tightening detection ensures even greater on-the-job reliability. The R-FHD receiver has been upgraded to the R-CM.


When tightening torque pass/fail decision is OK.

 


When tightening torque pass/fail decision of NG or in the case of two rounds of tightening detection.

 


Shown with Wireless Module M-FD and AC Adaptor BA-8R connected to R-CM receiver.

 


Principle of two rounds of tightening detection in FDD series

 


Marking torque wrench “MQSPFD/MQSPFDD” equipped with the FD/FDD transmitter, with which you can ensure in a later process or even after shipment that tightening was correctly performed; can be custom-made after receiving an order.

Application

  • Tightening Torque Data Management
  • Pokayoke (tightening error-proof)

Features

  • Defect prevention with a large pass/fail decision LED: Transmission error or tightening torque defect can be immediately known from this large LED.
  • Battery life is five times that of the conventional product.*: Continuous use time is significantly increased to 24 hours from 5 hours in the case of conventional FHD. It can be used for about one day without changing the batteries, which not only reduces the battery cost, but also eliminates the effort required for replacing the batteries.(*In the case of FD model. Continuous use time in the case of FDD model is 12 hours.)
  • The receiver has been upgraded to the R-CM Wireless Receiver with Interchangeable Modules.
  • LCD display of the transmitter would show the tightening torque.
  • Compact transmitter with enhanced workability: Transmitter has been made compact compared to the conventional product. Starting from 25N・m class torque wrench (example: CSP25N3) it can be loaded, and it can be used in a small place or for tightening at a small torque.
  • Settings can be done easily using a computer. The setting software can be downloaded for free from the Tohnichi website. Use the RS232C cable to connect the setting controller (SB-FH2) to the computer, then send the settings wirelessly from SB-FH2 to the FD/FDD transmitter and the R-CM + M-FD receiver.
  • [Features of FDD] “Two rounds of tightening detection function”: By mounting a gyro sensor and monitoring the angle, it is possible to prevent the tightening of bolts two times. Pokayoke for just managing the number of times of tightening or simple tightening torque data management offer highly reliable torque management. (*Remodeling from FD model is also possible.)
  • Marking torque wrench “MQSPFD/MQSPFDD” equipped with the FD/FDD transmitter, with which you can ensure in a later process or even after shipment that tightening was correctly performed; can be custom-made after receiving an order.
  • Tohnichi’s interchangeable head torque wrenches can be used with our interchange head lineup, which offers the best selection in the world, making these wrenches ideal for your work.
  • The FD/FDD series are compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.

Demonstration video

FD/FDD Series click-type wireless data transfer preset torque wrenches are now available.

Specifications



Notes:

The FD/FDD series conforms to wireless technical standards in Japan (TELEC), the U.S. (FCC), Canada (IC), Thailand (NTC), China (SRCC), Malaysia (SIRIM), Indonesia (SDPPI), Taiwan (NCC), the EU (CE), South Korea (KC), India (WPC), Russia (FSB), and Singapore (IMDA). (Information valid as of June 2021.) However, certain restrictions apply regarding export procedures to Indonesia (SDPPI), so please check with Tohnichi for more information. Can also be used in Mexico and Vietnam.

  • Japan’s Measurement Law requires that the units of measure for products marketed and used in Japan be SI units, except for some specialized fields.
  • Products manufactured for the global market offer a selection of metric and American units of measure.
  • Verify the wireless standards and technical criteria used in the applicable country or region.
  • See the catalog for further information on the R-CM receiver.
  • The FD/FDD series are compliant with ISO 6789:2017 starting January 2022. Calibration Certificates will be different from older products.

Standard accessory:

  • FD/FDD transmitter protection cover (FD-PCV): 1
  • Two AAA nickel metal hydride batteries. * Charger not included.

Dimensions

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top