Okabe
Okabe A30-0310 Chain Hanging Loop: Beam
Product Made in Japan
Manufacturer: Okabe
Model: A30-0310
U-shaped chain hanging loop for H-beam
Product | Weight (kg/pc) | Quantity (pc/bag) | Weight (kg/bag) | Packing |
---|---|---|---|---|
Chain Hanging Loop Beam | 0.98 | 25 | 24.5 | PP bag |
Allowable load 4.21kN (430kgf
Features
● The special large ring facilitates easy chain hanging operation, and protects the chain from kinks and deformation.
● The use of hot rolled steel with higher strength and stability allows safe installation.
● The swivel and swing ring enables easy installation.
● The swing ring also allows for compact storage.
● The hanging loop can be securely fastened to H-beam because of the use of high tensile cup point bolts as lock bolts.
Cautions
● Hang a chain to the product in such a way as to avoid deformation of chain link.
● Do not use the product for lifting steel beams.
● Tighten the bolt with a tightening torque of 3.43~4.41kN・cm (350~450kgf・cm).
● Regarding the pulling directions of the ring, follow the “Range of use” shown in the figure above.
● In a case of hanging shelf scaffolding, use the hanging loop within the allowable load for scaffolding chain.
● When mounting the hanging loop to a flange, fit the U-shaped part to the flange until the flange is fully inserted.
● Applicable flange thickness of Hbeam is no less than 6mm, and no more than 32mm.
● Be sure to use the hanging loop within the allowable load.