Japan, Toho Seisakusho
Toho Seisakusho VB-2324 Series 2-Way Solenoid Valve
Made in Japan
Manufacturer: Toho Seisakusho
Model: VB-2324 Series: VB-2324S type , VB-2324F type
Features
The VB-2324 series 2-way solenoid valve is designed for opening and closing flow paths for non-corrosive water, oil, air, non-corrosive gases, and saturated steam.
All models other than 100A can operate up to a maximum pressure difference of 1MPa, so they have a wide range of applications and are the most commonly used series.
A strong spring opens the valve when off; magnetic force closes it with little margin, unsuitable for back pressure areas.
In addition, we have a surge suppressor and rectifier unit built into the terminal box, so we can manufacture it for either AC or DC.
The valve is directly connected to the electromagnet, so it operates reliably even without pressure.
Specification
| specification | |||||||||||
| Connection diameter | 10A~100A | ||||||||||
| Connection type | JIS.Rc pipe taper thread connection (JIS.B0203) | ||||||||||
| JIS.10K flat face flange (JIS.B2239) | |||||||||||
| Type of fluid | Non-corrosive water and gas, air, oil, saturated steam | ||||||||||
| maximum fluid pressure | 1.0MPa | ||||||||||
| Maximum working pressure difference | 10A to 80A: 1MPa | ||||||||||
| Cv value | Connection diameter | 10A | 15A | 20A | 25A | 32A | 40A | 50A | 65A | 80A | 100A |
| 3.6 | 3.6 | 5.2 | 11 | 15 | twenty three | 35 | 50 | 78 | 150 | ||
| Fluid temperature (℃) | 0-180 | ||||||||||
| Valve main material | Main body | FC200 | |||||||||
| piston valve | 10A~25A: SUS304 | ||||||||||
| 32A~40A: SUS420J2 | |||||||||||
| 50A~100A: CAC406 | |||||||||||
| needle valve | SUS630 | ||||||||||
| valve seat | 10A~40A: SUS304 (SCS16) | ||||||||||
| 50A~100A: CAC406 | |||||||||||
| sheet | PTFE | ||||||||||
| Power-supply voltage | AC100V, 110V, 200V, 220V±10%, 50/60Hz | ||||||||||
| DC100V, 110V, 200V, 220V±10% | |||||||||||
| valve operation | Valve closes when energized | ||||||||||
| power consumption | 10A ~ 20A: Approx. 20W 25A ~ 40A: Approx. 35W | ||||||||||
| 50A ~ 65A: Approx. 60W 80A ~ 100A: Approx. 90W | |||||||||||
| protective structure | Outdoor general-purpose type/IP54 equivalent | ||||||||||
| Allowable ambient temperature (℃) | Where there is no corrosive gas, -10 to +60 | ||||||||||
| Installation | Upward vertical installation on horizontal piping | ||||||||||
| Paint color | Munsell 7.5BG 4/1.5, lacquer finish | ||||||||||
