Okabe
Okabe B10-0510 Separator Joint Pocket
Product Made in Japan
Manufacturer: Okabe
Model: B10-0510
Joint pocket for post-installation of beam work separator
◆Product specification
● Applicable Separator sizes: W5/16
● Allowable tensile load: 7.35kN (750kgf)
Calculation method:
Basic formula: Beam width ± adjustment dimension = Separator to be used
●Adjustment dimension chart (mm)
Left side | Right side | |||
---|---|---|---|---|
Type Zero (For hat type) | Type A (For hat type) | Type B (For finishing – Plastic cones, Insulation part) | Type C (For finishing) | |
Type Zero (For hat type) | 0 | -5 | -20 | +5 |
Type A (For hat type) | -5 | -10 | -25 | 0 |
Type B (For finishing – Plastic cones, Insulation part) | -20 | -25 | -40 | -15 |
Type C (For finishing) | +5 | 0 | -15 | +10 |
● Basic formula Example:
Beamwidth of 500mm/Separator to be used: Type B
Type | Beam width | Adjustment dimension | Calculation formula | Separator to be used | |
---|---|---|---|---|---|
Right side | Left side | (mm) | (mm) | (mm) | (Order) |
Type Zero | Type Zero | 500 | ±0 | 500±0=500 | B-500 |
Type Zero | Type Zero | 500 | -20 | 500-20-480 | B-480 |
Type A | Type A | 500 | -10 | 500-10=490 | B-490 |
Type B | Type B | 500 | -40 | 500-40-460 | B-460 |
Type C | Type C | 500 | +10 | 500+10=510 | B-510 |
◆Working method
◆Quantity
Product | Quantity (pc/case) | Weight (kg/case) | Packing |
---|---|---|---|
Separator Joint Pocket Type Zero | 250 (including nuts) | 12 | Case |
Separator Joint Pocket Type A | 250 (including nuts) | 13 | Case |
Separator Joint Pocket Type B | 250 (including nuts) | 10 | Case |
Separator Joint Pocket Type C | 250 (including nuts) | 11 | Case |
Caution
● Install the product with the opening face upward.
● Tighten form ties and fasten the product securely
● Do not hammer the main body.
● Make sure that the thread of the separator has passed the stopper ( ④ ).
● Do not deform the main body of the hardware. (This will cause a deterioration of the stopper function and strength.)