,

Kimoto Peace of mind guard Corners

Product Made in Japan
Manufacturer: Kimoto
Model: Peace of mind guard

What is Carstopper Corner Guard?

It buffers the impact of cars and trolleys hitting pillars and walls in parking lots and factories, and prevents damage to pillars and walls. It also reduces damage to cars, trolleys, etc. Even when a person hits the guard part, it becomes a cushion and the damage is reduced.

What is Safety Guard?

It is a corner guard that allows you to adjust the angle from the plane to 90°. It can be installed without worrying about the angle. It can be used as a cushion for walls, as a protective material for corners with large angles, and as a cushioning material for pillars such as parking lots.
It can be temporarily fixed with adhesive tape and can be easily attached with the included screws. In addition, since the material is soft vinyl chloride resin, it can be cut on site and the length can be adjusted.

Specification

materialSoft Vinyl Chloride Resin (PVC)
colorYellow, Beige, Black, Grey
Unit of Measure1 pc
accessory・ Adhesive tape (for temporary fastening)
・ With screws for concrete: Nabe head 4 x 25 mm (1 m … 14 pcs, 2m… 28 bottles)
・ Visguide
* There is no dedicated end cap.
Mounting methodbis
remarks・Length cutting is also supported.
・ It is also sold without adhesive tape and screws for concrete.
productABClengthWeight (per 1m)
Peace of Mind Guard TP-10014㎜55㎜100㎜1m、2m950g
Safety Guard TP-15014㎜80㎜150㎜1m、2m1,500g

plane

安心ガード平面時の断面図

corner

安心ガードコーナー時の断面図

安心ガードと付属の取付用ビス、ビスガイド
Safety Guard TP-100: Yellow, Black
Safety Guard TP-150: Beige
Included are screws and visguides

Construction example

  • ・ Protective materials for pillars and walls in parking lots, factories, schools, public facilities, etc.
  • ・ Cushioning material for the wall of the parking lot
  • • Overhead cushioning
  • ・ Cover of the rising part of the flower bed of the nursery school or kindergarten

Gas cylinder unloading area

コンクリート保護のためのコーナーガード
安心ガードTP-100を施工

In order to prevent concrete from chipping when unloading gas cylinders, the safety guard TP-100 is attached to the tip with screws.

Warehouse Door Knob Cushioning Material

ドアノブの緩衝材としてSince the doorknob hits the sliding door, a safety guard is cut and installed as a cushioning material.

Mounting method

● Clean and remove dirt, moisture, oil, etc. from the installation area.

  1. Mark the mounting position (A dimension) and position it, and then attach it with temporary adhesive tape.
    Mounting position (A dimension)
    TP-100 is about
    38 mm from the opponent’s corner TP-150 is about 63 mm from the opponent’s corner
    *Note: The tip of the
    center foot B should be at the tip of the opponent’s corner, or do not touch it.
  2. Make an incision with a cutter only in the place where the screws are fastened to the screw cutting part on the safety guard surface.
  3. Set the included screw guide (pipe) in the incision, and drill the pilot hole of the concrete screw (nabe head 4×25 mm) with a drill diameter of 3.4 mm. Or fix it with screws that match the material.
    (Screw fasteners should be installed slowly and surely.) )

安心ガードの取り付け図

merit

  • ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) )
  • ・ Various sizes.
  • ・ There is no color transfer like rubber.
  • ・ You can also choose the construction method.
  • ・ When made of rubber sponge, it has excellent cushioning.

demerit

  • ・ There are few color variations.
  • ・ Most of them are straight line specifications.
  • ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
  • ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.

Construction example

  • ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
  • ・ Cushioning material for the wall of the parking lot
  • • Overhead cushioning
  • ・ Cover of the rising part of the flower bed of the nursery school or kindergarten

Pillar protection for store parking lots

Protection of pillars in store parking lots.Product: Guard Bracket 65 Yellow It is used as a protective and cushioning material for the corners of pillars in
store parking lots.

Vehicle cushioning materials for truck terminals

Vehicle impact cushioning material for truck terminals.Product: D-type car stopper It is installed as a buffer material for vehicle impact in truck terminals.


Kouei is Distributor/Agent of Kimoto Rubber Industry Co.,LTD.
Other items of Kimoto
Request the quotation for Kimoto

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top