Japan, Maeda Koki
Maeda Koki MKCTV Type Water Signal
Made in Japan
Manufacturer: Maeda Machinery Research Institute Ltd.
Model: MKCTV Type
Features
- A transparent tapered tube is used, which allows the flow rate to be visually checked, so the approximate flow rate can be confirmed by looking at the relative position of the ball (or float) and the red line.
- With flow control valve. The required flow rate can be set by adjusting the miniature valve to align the ball with the red line .
- With protective cover The metal protective cover reduces the possibility of damage from external impacts. No installation orientation restrictions are imposed .
- A spring is used inside, so the installation orientation can be freely adjusted, such as upward, downward, or sideways.
Models List
Model | Dimensions (mm) [ The overall width is the casting surface, so there may be individual differences in dimensions] | Standard specification flow rate (approx. L/min) | Flow curve table *Standard specifications (PDF document) | |||
connection | full length | Overall width | Depth | |||
MKCTV20-1TW | RC1/8 | 115 | 30 | 51 | 1 to 5 |  |
MKCTV20-2TW | Rc1/4 | 115 | 30 | 51 | ||
MKCTV20-3TW | Rc3/8 | 122 | 30 | 51 | ||
Specifications
| Specification | Details | Additional Information | |
|---|---|---|---|
| Fluid | Water | – | |
| Flow | See above | Please contact us if you require a flow rate below or above the standard specification. | |
| Connection | Rc female thread | Change to R male thread. Combination with R male thread is also possible. | |
| Heatproof Temperature | Maximum 80℃ | – | |
| Pressure Resistance | 1MPa | – | |
| Material | Transparent Tube | Acrylic | – |
| Fittings | C3604 (Brass) | – | |
| Protective Cover | BC (gunmetal) | – | |
| Spring | SUS304 | – | |
| Nylon Ball | Nylon 66 | In some cases, cylindrical floats are used. | |
| O-Ring | Nitrile Rubber | – | |
| Miniature Valve | B.C. | It is also possible to produce valves with lock nuts. | |
