HANKOKU ELECTRIC CO., Japan
HANKOKU Siren Storage Case And Mounting Bracket
![](https://koueitrading.com/global/wp-content/uploads/2020/06/89-575x380.png)
Made in Japan
Manufacturer: HANKOKU ELECTRIC CO.,LTD.
Siren mounting bracket that can be installed anywhere
![HANKOKU](https://www.hankoku.co.jp/wp/wp-content/uploads/2022/12/gallery_case.png)
Siren storage case
A simple design made of stainless steel. It protects the siren from bad weather and allows you to use the siren for a longer period of time. It can be mounted on a pole or flat surface using the bracket.
*The sound distance will be shorter because the siren is surrounded by a wall.
Compatible models: AWN
●Made of stainless steel
![](https://www.hankoku.co.jp/wp/wp-content/uploads/2022/12/0f21e648f26572e6547b29b387983253.png)
Siren mounting bracket, utility pole mounting bracket
This is a metal fitting for attaching a siren to a utility pole or steel pipe pole. It is attached by combining a siren mounting plate made by Hankoku Denki and a pole mounting hardware made by Iwabuchi. The mounting fitting is selected according to the outer diameter of the pole.
●Hot-dip galvanized finish
![](https://www.hankoku.co.jp/wp/wp-content/uploads/2022/12/9a34f7ae7159dbc42c6e10ba2815f69c.png)
Siren mounting bracket Wall mounting bracket
This is a bracket for use in places where it is difficult to install a siren. We will provide you with a bracket that matches the siren you are installing. When installing, please use it in a place where the wall is strong enough.
●Hot-dip galvanized finish
![](https://www.hankoku.co.jp/wp/wp-content/uploads/2022/12/c087b0c549339d1b33d196afb32e35bc.png)
Siren mounting bracket Top mounting bracket
This is a metal fitting that can be attached to the top of a utility pole or a hose drying tower. We will prepare the metal fitting according to the siren to be installed and the outer diameter of the pole.
●Hot-dip galvanized finish
Related Products
-
Chiyoda Seiki BHSS-4PM Second-stage Pressure Reducing Pressure Regulator For Equipment And Line/panel Mount (Primary pressure: 15.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 100 L/min-Air)
-
LOBTEX WF-A L-type Clamp Grip Handle And Soft Cap
-
Naigai Pressure PF Type (large diameter ) E-P Joint
-
TONE 8A-BA Budd Wheel Socket (For Inner Nut Of Truck Wheel)
-
Kunimoto 1846223 KS Temporary Landing Safety Pole Set B
-
YOSHITAKE GP-1001 Pressure Reducing Valve – Steam