Eisen, Japan
Eisen ETP Series Tapered Pin Gauge Set
Made in Japan
Manufacturer: Eisen Co., Ltd.
Model: ETP Series
About the Series
Precision and specifications
| Tolerance | Roundness | Hardness |
|---|---|---|
| ±2.0μm | 1.5μm | 58+ |
A precision taper gauge that can provide actual values in the micron range , rather than just measuring whether it goes through or stops .
- By measuring the position where it stops or reading the scale, you can get the actual measurement in microns.
- The effective gauge length is 60 mm with a taper of 0.03 mm.
- The dimensions are engraved on both ends of the pin, and the size is also indicated on the plastic case.
Shape
Series Details
| Set number | Nominal dimensions mm (in 0.03 mm increments) | Number of sets | Price (yen) | |
|---|---|---|---|---|
| ETP – 1 | 1.01/0.98 …1.97/1.94 |
1.04/1.01… 2.00/1.97 |
34 | 75,000 |
| ↓ | ↓ | |||
| ETP – 5 | 5.01/4.98 …5.97/5.94 |
5.04/5.01… 6.00/5.97 |
||
| ETP – 6 | 6.01/5.98 …6.97/6.94 |
6.04/6.01… 7.00/6.97 |
120,000 | |
| ↓ | ↓ | |||
| ETP-9 | 9.01/8.98 …9.97/9.94 |
9.04/9.01… 10.00/9.97 |
||
- We also sell them individually. We can also manufacture special sizes.
- For ETP-6 to 10, the scale (minimum scale 0.005 mm) is laser engraved on the side of the gauge.
Related Products
-
Eagle Clamp SEH Type Endless Chain with Hooker
-
KORI SEIKI MS Standard Counter (Standard)
-
Fujii Denko R-504-GB (G-Braid) Harness & Lanyard
-
LOBTEX MN110 Micro Nippers
-
Chiyoda Seiki FS-22R/FS-29R Assembly Device Components (Strainers, check valves, explosion prevention devices, connecting pipes, container connecting pipes) (for hydrogen)
-
Kakuta No.PA250 Hook Clamp
REQUEST QUOTATION
PAYMENT
LINK
