WFS200 Wi-Fi Tem&HumidityMeasurementUnit

Datalink WFS200 Series Wi-Fi Temperature And Humidity Measurement Unit

Manufacturer: DataLink
Model: WFS200 Series

Features

Multi-point measurement is possible using multiple units.
The unit uses a 2.4GHz Wi-Fi chip for wireless communication.
The unit communicates over Wi-Fi using UDP and TCP/IP protocols.
You can configure Wi-Fi parameters through the RS232C interface.
The device features a built-in antenna for reliable signal transmission.
The communication distance is approximately 50 meters under standard conditions.
A USB battery can be used as the power source, and enabling sleep mode allows for long-term operation.
The product is RoHS compliant and certified under the Japanese Radio Law technical standards.

Specifications

Model	WFS200C	*WFS100S 3**
Coin-free standard	Wi-Fi IEEE802.11b/g/n (2.4GHz)	–
Operating conditions	Temperature: ±0 to +50°C Humidity: No condensation	Temperature: -35 to +75°C Humidity: Moisture-proof/Condensation-resistant (Excluding connectors and sensors)
Transmission distance	50m (maximum)	–
Serial Interface	RS232C Dsub9 pin male	RS232C Dsub9 pin female
Power consumption	0.1A or less/DC3.3V *2	–
Power supply	USB (DC5V)	–
Body dimensions	W33 × H16 × D57mm	W31 × H15.4 × D44mm
Weight	Approximately 25g	Approximately 15g
Environmental standards	RoHS Compliant	RoHS Compliant

*1. Similarly, when using WFS200C and WFS100S at the same measurement point,the conditions of use for WFS200C apply.
*2. A current of 350mA may flow momentarily through the Wi-Fi chip used.
*3. For details on the sensor characteristics, please refer to the product manual.

◆Packing items

Packaging Item	Quantity
WFS200C (control unit)	1 piece
WFS100S (sensor part)	1 piece
RS232C cross cable 1m (for setting)	1 bottle
USB cable approx. 1m (for power supply)	1 bottle
User’s Manual	1 book