Multi Measuring Instruments Co.
Multi ATV-240 Non-Contact Voltage Detector
Manufacturer: Multi Measuring Instruments Co., Ltd.
Model: ATV-240
Features
- Risk Prevention – To prevent the risk of burning out the built-in VT due to a short circuit in the test equipment clip, a protective approach is taken.
- Non-Contact Voltage Measurement – The VT secondary voltage is measured in a non-contact manner, from the top of the wire sheath.
- Voltage Detection – When the voltage is detected, the signal output is turned on.
- Indication of Detection – The operation light flashes to indicate the detection of voltage.
Specifications
| Voltage Sensing Range | AC Approx. 70V ~ 240V (50/60Hz) |
|---|---|
| Operating time | Within 20mS |
| Display & Signal Output | When the voltage is detected, the operation light will flash and the output signal will be turned on. |
| Output contact capacity | AC/DC 220V、0.5A |
| power | AA alkaline battery LR-6 × 2 |
| Operating Circuit Voltage | AC 500V or less (low voltage circuit) |
| Dimensions and weight | W76×H135×D30mm approx. 220g |
| accessory | Battery, Output Leads×2, Dedicated Case, Instruction Manual, Non-Contact Sensor |
