I.T.O Corporation
ITO C/ G/ GL Range Low Pressure Regulator

Manufacturer: I.T.O Corporation
Model: C/ G/ GL Range
Incorporated: Relief, Strainer*
*C-10A, C-20, GL-50, GL-70 and G-32A only.
- The C, G, GL range is a direct-operated regulator to reduce outlet pressure to 20kPa or less.
- Available for type 1 or type 2 according to the inlet pressure. Type 1 for high pressure pipe line use up to 1.56MPa with a JIS 20K flanged connection at inlet, and Type 2 for medium pressure pipe line use between 0.025~0.10MPa with JIS 10K flanged connection at inlet.
![]() | ![]() | ||||||||||||||||||||
|
| ||||||||||||||||||||
![]() | ![]() | ||||||||||||||||||||
|
| ||||||||||||||||||||
![]() | ![]() | ||||||||||||||||||||
|
| ||||||||||||||||||||
![]() |
|
Range Specification
Regulation Type | Type 1 | Type 2 |
---|---|---|
Inlet Pressure (MPa) | 0.07~1.56 | 0.025~0.10 |
Outlet Pressure (kPa) C-10A~GL-70 | 0.50~20.0 *1 | |
Outlet Pressure (kPa) G-32A~GL-500 | 0.80~20.0 *1 | |
Lockup Pressure (kPa) | ≤ Set Point × 1.3 |
*1 Interchangeable springs are available.
Interchangeable Spring Selection
Set point range (kPa)
No. | ① | ② | ③ | ④ | ⑤ |
---|---|---|---|---|---|
C-10A | 2.30~3.60 | 1.50~2.30 | 3.60~5.50 | 7.50~10.0 | 9.00~15.0 |
C-20 | 1.60~3.40 | 5.00~10.0 | 9.00~15.0 | 14.0~20.0 | 0.80~1.80 |
GL-50 GL-70 | 1.00~4.00 | 3.50~10.0 | 5.00~15.0 | 10.0~20.0 | 15.0~20.0 |
G-32A | 1.30~3.70 | 0.80~1.50 | 8.00~16.0 | 3.00~10.5 | |
G-36C GL-300 GL-400 GL-500 | 1.50~3.50 | 3.20~10.5 | 1.25~2.50 | 0.80~1.50 | 8.00~16.0 |
No. | ⑥ | ⑦ | ⑧ | ⑨ | SGX No.1 (White) |
---|---|---|---|---|---|
C-10A | 14.0~20.0 | 5.50~8.00 | 4.00~8.00 | 9.00~12.0 | 0.50~1.50 |
C-20 | 1.30~3.00 | 3.00~6.00 | 16.0~20.0 | 8.00~12.0 | 0.50~1.50 |
GL-50 GL-70 | 0.30~1.00 | 5.00~20.0 | 6.00~12.0 | ||
G-32A | 14.0~20.0 | 2.00~8.00 | 6.00~12.0 | ||
G-36C GL-300 GL-400 GL-500 | 14.0~20.0 | 3.00~6.00 | 8.00~12.0 |
shows the standard spring.
requires either a supporting diaphragm disc or a material change from the standard diaphragm disc.
Flow Rate | |
---|---|
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() |