Japan, Measuring Instrument
OSC77VN101 Digital Torque Tester (Accuracy 0.5%)
Model: OSC77VN101
Features
– Designed for general purpose torque testing
-Suitable for testing any manual powered torque tools
– Can communicate with the computer via RS232 cable
– Comes in an elegant plastic carrying case
Specifications
Model | OSC 77VN 101 | |||||||
Accuracy | +/-0.5% FS | Unit for measurement | N.m,kgf.m | |||||
Creep | +/-0.02% FS | Mode of measurement | Track, Peak, First-Peak | |||||
Non-Linearity | +/-0.02% FS | Min. torque | Readable at min 5% of F.S | |||||
Temp. shift at 0 load | +/-0.02% FS | Auto Reset Range | Adjustable 2 to 100% of F.S | |||||
Size (Approx.) | 100x170x48cm( 5-20Nm) | Pass-Fail range | Adjustable 2 to 100% of F.S | |||||
100x225x52 ( 50-400Nm) | Charger rating | 500mA 12 V DC | ||||||
Weight (Approx.) | 1.38kg (5-20Nm) | Charging time | 4-6hours for full charge | |||||
2.85 kg(50-400Nm) | ADC Sampling rate | 2,000Hz | ||||||
Max. torque | 120% of rated capacity stated | Peak Capture Rate | 0.010 S | |||||
Max.mounting torque | 150% of rated capacity | Display | 128×64 pixel dot matrix display |
Model | Capacity N.m | Model | Capacity N.m | |
OSC 77VN101-A | 0.5×0.0001 | OSC 77VN101-E | 20×0.005 | |
OSC 77VN101-B | 1×0.0002 | OSC 77VN101-F | 50×0.01 | |
OSC 77VN101-C | 5×0.0001 | OSC 77VN101-G | 200×0.05 | |
OSC 77VN101-D | 10×0.002 | OSC 77VN101-H | 400×0.1 |
Related Products
-
KONAN TA-200R-F16-00 Pneumatic Rotary Actuator For Operation Oflarge-diameter Valve
-
KONAN MAGSTER ⅡF MVPEF ー03 5 Port Solenoid Valves Gasket-connected Type 3 Positions Center Open To Exhaust
-
Eagle Jack (Konno Corporation) SJ-15 Atom Jack
-
NAGANO KEIKI CQ51 Pressure Switch(high-pressureResistance)
-
IMADA CW-500N Wire Clamp Jig
-
Kansai Kogu B04G500100, B04G500200 Cutting Wheel Metalcut