Japan, KETT ELECTRIC LABORATORY, Measurement, Moisture Analyzer
KETT ELECTRIC LABORATORY FD-800 Infrared Moisture Analyzer
Product Made in Japan
Manufacturer: KETT ELECTRIC LABORATORY
Model: FD-800
Features of FD-800
The flagship model of the infrared moisture analyzer
Minimum moisture content display 0.01%, weight display 1mg
Dual temperature control even monitors on-tray temperatures
Significantly shortened measurement time compared with our other models
Specification
| Measurement method | Detection of weight loss by heating & drying |
|---|---|
| Sample mass | 0.1-120g (optional weight sampling) |
| Measurement subject | Moisture / Solid content / Weight |
| Measurement range | 0-100% (wet base, solids); 0-500% (dry base) |
| Repeatability (standard deviation) | Sample with a weight of 5g or higher: 0.05%Sample with a weight of 10g or higher: 0.02%) |
| Resolution | Moisture percentage 0.01% / 0.1%; Weight 1 mg Temperature setting range for thermistor (T1): 30 – 180°C (1°C interval); for radiation thermometer (T2) 30 – 250°C (1°C interval) |
| Measurement modes | Automatic stop mode, Timer stop mode, Rapid drying mode, Equilibrium drying mode, Step drying mode, Predictive (comparative) measurement mode |
| External output | RS-232C interface |
| Environmental conditions | Temperature 5~40°C, Humidity: max of 85%RH Pollution degree 2, Altitude up to 2000m |
| Sample dish | SUS (diameter 130 mm, depth 13 mm) |
| Heat source | Mid-wave infrared quartz heater (200Wx2) |
| Power source | AC100~120V / 220~240V (50/60Hz) |
| Power consumption | Max 900W |
| Dimensions & weight | 220(W)x415(D)x190(H), 4.5kg ,Shipment 310(W)x580(D)x400(H), 10kg |
| Accessories | Spare sample pan, Aluminum sheets, etc |
| Options | Printer Set (VZ-330, Printer Cable: VZC-14) 10x Printer paper rolls, 500x Aluminum sheets Radiation thermometer calibration kit GF-200 (digital thermometer, standard heating sample), Datalogger software “FDL-02” (RS-232C cable, USB-RS232C conversion cable), Windshield with deodorizer case FW-100 |
Options
Example of VZ-330 output:
FW-100 can be installed within t h e F D -720 to reduce errors caused by the influence of external airflow on the high precision balance. Further, since a deodorizing filter is provided on its upper portion, it is also possible to reduce odors created during heat drying.
By connecting the FD-800 to a PC in which the “Datalogger software FDL-01” and MS Excel® are installed, it is possible to transfer and save the measurement data to the PC in real-time. Also, it is possible to display the recorded measurement data graphically, so that the moisture and temperature condition changes can be visually confirmed. The graph can show the moisture, thermistor (T1) temperature, and radiation thermometer (T2) temperature.
Different forms of samples can be measured
Most samples that vaporize only moisture and cause no hazardous reaction under heating can be measured.
Related Products
-
Shinano SI-1457 1/2″ Impact Wrench Standard Air Tools
-
Watanabe TW-2XA 2 output isolator (AC power supply) – Signal Converter
-
UHT CORPORATION GU-1 No.2set Cylinder polishing unit
-
SENSEZ HJI Compact Pressure Sensors
-
Obishi Keiki Seisakusho Cast Iron Precision Surface Plate
-
Okazaki Seiko BDG Resin Drill Grindstone
