The standard Z Slider achieves thin and compact in Z axis direction.
Specifications
| Item | Model | ||||
|---|---|---|---|---|---|
| ZS6 | ZS10 | ZS16 | ZS20 | ZS25 | |
| Bore size mm [in.] | 6 [0.236] | 10 [0.394] | 16 [0.630] | 20 [0.787] | 25 [0.984] |
| Stroke tolerance mm [in.] | +1 [+0.039] / 0 [0] | ||||
| Operation type | Double Acting Type | ||||
| Media | Air | ||||
| Operating pressure range MPa [psi.] | 0.15～0.7 [22～102] | ||||
| Proof pressure MPa [psi.] | 1.05 [152] | ||||
| Operating temperature range °C [°F] | 0～60 [32～140] | ||||
| Operating speed range mm/s [in./sec.] | 50～500 [2.0～19.7] | ||||
| Cushion Standard | Rubber bumper | ||||
| Cushion Options | Shock absorber | ||||
| Lubrication Cylinder portion | Not required (If lubrication is required, use Turbine Oil Class 1 [ISO VG32] or equivalent.) | ||||
| Lubrication Guide portion | Not required (If lubrication is required, use lithium soap-based grease.) | ||||
| Repeatability mm [in.] | ±0.05 [±0.002] | ||||
| Traveling parallelism mm [in.] | 0.1 [0.004] (Up to standard maximum stroke φ6: 40mm, φ10: 50mm, φ16, 20, 25: 80mm) | ||||
| Parallelism of table top surface mm [in.] | 0.2 [0.008] (Exceeds the standard maximum stroke, up to the maximum available stroke) | ||||
| Perpendicularity of plate surface mm [in.] | — | ||||
| Stroke adjusting range Rubber stopper retracted side mm [in.] | −12～0 [−0.472～0] | −11～0 [−0.433～0] | −14～0 [−0.551～0] | −13～0 [−0.512～0] | −17～0 [−0.669～0] |
| Stroke adjusting range Rubber stopper extended side mm [in.] | — | — | — | — | — |
| Stroke adjusting range Shock absorber retracted side mm [in.] | — | −11～0 [−0.433～0] | −11～0 [−0.433～0] | −19～0 [−0.748～0] | −18～0 [−0.709～0] |
| Stroke adjusting range Shock absorber extended side mm [in.] | — | — | — | — | — |
| Maximum allowable load mass kg [lb.] | 6.7 [14.8] | 16.6 [36.6] | 22.9 [50.5] | 41.7 [91.9] | 63.4 [139.8] |
| Port size | M5×0.8 | Rc1/8 | |||
