Venn MD-35F type primary pressure control valve (for water, hot water, air, liquid)

Manufacturer: Venn Co., Ltd.
Model: MD-35F

Features

  • Pressure fluctuation during adjustment is minimal.
  • As a result, high-capacity pressure adjustment is possible with high accuracy.
  • In addition, a pressure-balanced structure prevents outlet pressure from being affected by downstream pressure changes.
  • Moreover, maintenance is easy because the unit can be disassembled from the top side only.
  • Furthermore, the mounting posture is flexible.
  • You can also attach an inlet-side pressure gauge directly to the main body.
  • At the same time, the unit is about 50% lighter than our conventional FC products.

Specifications

Product codeMD35F-DMD35F-D
Valve typePrimary pressure control valve
typeWetting part stainless steel
Nominal diameter25-50 (1-2)65-100 (2 1/2-4)
Applicable fluidLiquid / air that does not corrode water / hot water / oil / material・ Inert gas
Fluid temperature5 to 90 ° C
Set pressure adjustment rangeL: 0.05-0.35MPa
M: 0.3-0.6MPa
H: 0.6-0.8MPa
L: 0.05-0.35MPa
M: 0.3-0.6MPa
Blow-down pressureSet pressure x 10% or less (minimum value 0.02MPa)
Allowable leakage amountNone (visual pressure gauge)
Minimum differential pressure before and after the valve0.05MPa
Fluid viscosity700cSt or less
End connectionJIS 10K FF flange
Mounting postureHorizontal / vertical freedom
Material bodySCS
Material Valve bodySUS
Material Valve seatSUS
Material Diaphragm discNBR
Material Spring caseADCFC

REQUEST QUOTATION

PAYMENT

payment-methods

LINK

koueigroup-banner1
koueigroup-banner1

Return Top