Manufacturer: HAKARU PLUS CORPORATION
Model: C2A
Specifications (For details other than the following, please refer to the series specifications)
Overview
This is a signal converter that isolates DC voltage or current signals and transmits them to the CC-Link master station.
Application Examples
- Isolates analog signals and inputs them to the sequencer.
- Analog measured value output can be displayed on a local indicator.
- Input and output of PLC PID instructions can be connected to a single C2A.
Model
C 2 A － (1) (2) － (3)
(1) Input[DC Voltage Input]
1 : 0～10mV
2 : 0～100mV
3 : 0～1V
4 : 0～10V
5 : 0～5V
6 : 1～5V
0 : Specified voltage range
(-10 to +60V) | [DC Current Input]
A : 4～20mA
D : 0～20mA
G : 0～1mA
Z : Specified current range |
(2) Output| 0 : None |
[Measured Value Output]
4 : 0～10V
5 : 0～5V
6 : 1～5V
0 : Specified voltage range
A : 4～20mA
Z : Specified current range | [Remote Output]
V 4 : 0～10V
V 5 : 0～5V
V 6 : 1～5V
V 0 : Specified voltage range
V A : 4～20mA
V Z : Specified current range |
(3) Power Supply| A : AC85～264V / DC85～143V |
| D : DC24V ±10% |
How to Order (Example)
Model : C2A-1A-A
Input Specifications
| Input Range | Input Resistance |
|---|
0～10mV
0～100mV | 10kΩ or more
100kΩ or more |
0～1V
0～10V
0～5V
1～5V | 1MΩ or more |
| Input Range | Input Resistance |
|---|
4～20mA
0～20mA
0～1mA | Approx. 250Ω
Approx. 50Ω
Approx. 1000Ω |
Output Specifications
At 1～5V load resistance: 500Ω or more
At 4～20mA load resistance: 0～600ΩInstallation Specifications
Power supply:- Approx. 7VA (at AC100V power), Approx. 6W (at DC100V power)
- Approx. 6W (at DC24V power)
Operating temperature range: -10 to +60°C
Mass: Approx. 400g
Performance
Reference accuracy: ±0.1%
Response time: 0.5 seconds or less (0→90%)Connection Diagram
(Note) For current input, an input resistor R is attached to the terminal section.
External Dimensions
Refer to “Common Specifications External Dimensions (page 2)”
