Toyo Machinery EC-250 Electric Cylinder

Toyo Machinery Co., Ltd. EC-250 Electric Cylinder（AC Motor）

Manufacturer: Toyo Machinery Co., Ltd.
Model: EC-250

Features

This model is designed with an AC servo motor, ball screw, and limit switches.
High-speed and high-acceleration response is made possible by using an AC servo motor.
Highly accurate position control can be achieved.
The controller is equipped with a 4.3-inch touch panel monitor.
Intuitive operation is made possible through the use of an icon display.
The TK electric cylinder is designed with a DC motor, ball screw, and limit switches.
The web position on the winder cart or rewinder cart is controlled.
A suitable electric cylinder can be selected according to the cart weight or rated thrust.

Specification / Model	EC-70 (EC-75)	EC-100-10	EC-150V-15 EC-150H-15	EC-160V-30 EC-160H-30	EC-200-25	EC-200-40	EC-200-45	EC-200-100
DC Motor	30W (40W)	60W	100W	200W	200W	200W	200W	200W
Rated Thrust Max	700N	1000N	1500N	3000N	2500N	4000N	4500N	10000N
Cylinder Speed Max	40mm/sec (33mm/sec)	18mm/sec	35mm/sec	50mm/sec	65mm/sec	40mm/sec	20mm/sec	10mm/sec
Cylinder Stroke	100mm 200mm	100mm 200mm	200mm 300mm 400mm	←	←	←	←	←
Geared Motor Reduction Gear Ratio	1/5	1/10	1/1	1/1	1/3	1/5	1/10	1/20
Ambient Temperature	45°C	←	←	←	←	←	←	←

Specification / Model	EC-210-30	EC-210-45	EC-210-75	EC-210-85	EC-220-30	EC-220-45	EC220-75	EC-220-85
DC Motor	350W	200W	200W	200W	350W	200W	200W	200W
Rated Thrust Max	3000N	4500N	7500N	8500N	3000N	4500N	7500N	8500N
Cylinder Speed Max	85mm/sec	35mm/sec	20mm/sec	10mm/sec	85mm/sec	35mm/sec	20mm/sec	10mm/sec
Cylinder Stroke	200mm 300mm 400mm	←	←	←	←	←	←	←
Geared Motor Reduction Gear Ratio	1/1	1/3	1/5	1/10	1/1	1/3	1/5	1/10
Ambient Temperature	45°C	←	←	←	←	←	←	←

The center-return function can also be added as an option.
EC-70 and EC-75 are provided as compact single-unit types combined with a ball screw and limit switches.
Two cylinder types are available.
EC-70 is equipped with a DC brushless motor.
EC-75 is equipped with a DC motor.
When ordering EC, the following information should be provided.
The motor position of EC-150 and EC-160 should be specified as either vertical type (V) or horizontal type (H).
The cylinder stroke should be provided.
The total mass of the cart with the web should be provided.