TECHNOPLAN
TECHNOPLAN CPH-CR Series Marking Line Holder
Manufacturer: TECHNOPLAN
Model: CPH-CR series
Marking Line Holder
CPH-CR Marking Line Holder
<Applications>
- Wrap the end of the marking line around the projection on the side and guide it along the groove on the magnetic holding surface to mark straight lines on steel frames and other steel structures.
CPH-CR30
| Model | Dimensions (mm) | Holding Force (N) | Screw Hole Dimensions (mm) | Magnet Used | Maximum Operating Temperature (Short-Time Limit) (°C) | Surface Treatment | Weight (g) |
|---|---|---|---|---|---|---|---|
| CPH-CR25 | φ25 × 25 | 117.6 (12 kgf) | M6 Depth 8 | Neodymium | 80 (100) | Exterior: Black Textured Coating Holding Surface: Groove for Passing a Marking Line (Groove Width: 2 mm) | 91 |
| CPH-CR30 | φ30 × 25 | 147 (15 kgf) | 131 | ||||
| CPH-CR40 | φ40 × 30 | 294 (30 kgf) | M8 Depth 12 | 283 | |||
| CPH-CR50 | φ50 × 40 | 490 (50 kgf) | 602 |
※ The holding force values are based on SS400 steel, 10 mm plate thickness, and a ground-finished surface.
※ 9.8 N = 1 kgf.
※ At the specified maximum operating temperature, the holder maintains approximately 80% of its holding force at room temperature. The short-term maximum temperature indicates a temperature suitable for brief, intermittent use.
※ The CPH-CR Series includes the applicable T-bolt. Additional T-bolts are also available as optional accessories.
Related Products
-
TECHNOPLAN CPL Series Permanent Magnetic Lifting Magnet
-
TECHNOPLAN TRA-CR Series Magnetic Rail With Rollers
-
TECHNOPLAN CWH-CS Series Right-Angle Supporter
-
TECHNOPLAN CPH-P-TB Series Coolant Separator
-
TECHNOPLAN HCPB-T And HCPB-F Series Magnetic Filter For Viscous Liquids
-
TECHNOPLAN CPH Series Coolant Separator
REQUEST QUOTATION
PAYMENT
LINK
