TECHNOPLAN
TECHNOPLAN TPM-F And TPM-T Series Plate Magnet
Manufacturer: TECHNOPLAN
Model: TPM-F and TPM-T series
Plate Magnet
TPM-F Plate Magnet
- Provides powerful magnetic attraction, while the permanent magnet maintains its effectiveness semi-permanently.
- In addition, the rugged construction requires no power supply, allowing installation in a wide range of locations.
Dimensional Drawing
| Model | Overall Dimensions (mm) | Attraction Capability (Distance) (mm) | Weight (kg) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Standard Type | Enclosed Type | B | L | H | h | 15 cm Nail | M10 Nut | M10 × 25 Bolt | |
| TPM-F1515 | TPM-F1515M | 150 | 150 | 42 | 3 | 80–100 | 40–60 | 60–80 | 6 |
| TPM-F1530 | TPM-F1530M | 300 | 11 | ||||||
| TPM-F1540 | TPM-F1540M | 400 | 15 | ||||||
| TPM-F1550 | TPM-F1550M | 500 | 18 | ||||||
| TPM-F1560 | TPM-F1560M | 600 | 22 | ||||||
| TPM-F2020 | TPM-F2020M | 200 | 200 | 55 | 100–130 | 60–80 | 80–100 | 13 | |
| TPM-F2030 | TPM-F2030M | 300 | 20 | ||||||
| TPM-F2040 | TPM-F2040M | 400 | 27 | ||||||
| TPM-F2050 | TPM-F2050M | 500 | 33 | ||||||
| TPM-F2060 | TPM-F2060M | 600 | 40 | ||||||
| TPM-F3030 | TPM-F3030M | 300 | 300 | 120–160 | 70–100 | 100–120 | 29 | ||
| TPM-F3040 | TPM-F3040M | 400 | 39 | ||||||
| TPM-F3050 | TPM-F3050M | 500 | 49 | ||||||
| TPM-F3060 | TPM-F3060M | 600 | 59 | ||||||
| TPM-F3080 | TPM-F3080M | 800 | 79 | ||||||
※ Maximum surface magnetic flux density: 130 mT (1,300 G)
TPM-T Plate Magnet with Pole Plate
- Install it on a chute or hopper to remove iron particles from raw materials used in powder-processing industries, including the chemical and pharmaceutical industries.
- The pole plate helps retain collected iron particles and prevents them from re-entering the material flow due to the pressure of passing material.
Dimensional Drawing
| Model | Overall Dimensions (mm) | Attraction Capability (Distance) (mm) | Weight (kg) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Standard Type | Enclosed Type | B | L | H | h | 15 cm Nail | M10 Nut | M10 × 25 Bolt | |
| TPM-T1515 | TPM-T1515M | 150 | 150 | 42 | 3 | 80–100 | 40–60 | 60–80 | 7 |
| TPM-T1530 | TPM-T1530M | 300 | 12 | ||||||
| TPM-T1540 | TPM-T1540M | 400 | 16 | ||||||
| TPM-T1550 | TPM-T1550M | 500 | 20 | ||||||
| TPM-T1560 | TPM-T1560M | 600 | 24 | ||||||
| TPM-T2020 | TPM-T2020M | 200 | 200 | 55 | 100–130 | 60–80 | 80–100 | 14 | |
| TPM-T2030 | TPM-T2030M | 300 | 21 | ||||||
| TPM-T2040 | TPM-T2040M | 400 | 29 | ||||||
| TPM-T2050 | TPM-T2050M | 500 | 35 | ||||||
| TPM-T2060 | TPM-T2060M | 600 | 42 | ||||||
| TPM-T3030 | TPM-T3030M | 300 | 300 | 120–160 | 70–100 | 100–120 | 32 | ||
| TPM-T3040 | TPM-T3040M | 400 | 42 | ||||||
| TPM-T3050 | TPM-T3050M | 500 | 53 | ||||||
| TPM-T3060 | TPM-T3060M | 600 | 63 | ||||||
| TPM-T3080 | TPM-T3080M | 800 | 84 | ||||||
※ Maximum surface magnetic flux density: 250 mT (2,500 G)
TPM-FH / TH High-Power Plate Magnet
<Flat Type> / <Pole Plate Type>
- This high-power model uses rare-earth magnets.
- Moreover, it provides higher separation efficiency than the standard type.
| Model | Overall Dimensions (mm) | Attraction Capability (Distance) (mm) | Weight (kg) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flat Type | With Pole Plate | B | L | H | h | 15 cm Nail | M10 Nut | M10 × 25 Bolt | Flat Type | With Pole Plate | ||
| Standard Type | Enclosed Type | Standard Type | Enclosed Type | |||||||||
| TPM-FH1510 | TPM-FH1510M | TPM-TH1510 | TPM-TH1510M | 150 | 100 | 25 | 3 | 100–130 | 60–80 | 80–100 | 3.0 | 4.0 |
| TPM-FH1515 | TPM-FH1515M | TPM-TH1515 | TPM-TH1515M | 150 | 4.5 | 6.0 | ||||||
| TPM-FH1520 | TPM-FH1520M | TPM-TH1520 | TPM-TH1520M | 200 | 5.5 | 8.0 | ||||||
| TPM-FH1530 | TPM-FH1530M | TPM-TH1530 | TPM-TH1530M | 300 | 8.5 | 12.0 | ||||||
| TPM-FH2020 | TPM-FH2020M | TPM-TH2020 | TPM-TH2020M | 200 | 200 | 120–160 | 70–100 | 100–120 | 8.0 | 10.0 | ||
| TPM-FH2025 | TPM-FH2025M | TPM-TH2025 | TPM-TH2025M | 250 | 10.0 | 12.5 | ||||||
| TPM-FH2030 | TPM-FH2030M | TPM-TH2030 | TPM-TH2030M | 300 | 11.5 | 15.0 | ||||||
| TPM-FH2040 | TPM-FH2040M | TPM-TH2040 | TPM-TH2040M | 400 | 15.5 | 20.0 | ||||||
※ Flat Type: Maximum surface magnetic flux density: 300 mT (3,000 G)
※ Pole Plate Type: Maximum surface magnetic flux density: 500 mT (5,000 G)
When using the unit in liquids other than oil-based fluids, such as water, select the sealed type (M).
【Plate Magnet Application Examples】
○ = Raw Material (Non-Magnetic Material)
■ = Iron Particles, etc. (Magnetic Material)
■ Example of a Suspended Plate Magnet
■ Example of Iron Particle Removal During Material Flow Using a Plate Magnet
■ Example of Using a Plate Magnet with Pole Plate
The pole plate prevents separated magnetic materials from returning to the raw material flow.
Example of Installation in a Powder/Granular Material Chute Line
This is an installation example for iron removal in a powder or granular material chute line.
Additionally, the unit can be designed with an openable structure and handle for easier operation and maintenance.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
