Manufacturer: TECHNOPLAN
Model: CEH-V series

V-Type Electromagnetic Holder

• Suitable for transporting irregularly shaped parts, pipes, and round bars.
• In addition, it can be used for workpiece transfer, positioning, palletizing, and orientation control in automated transfer lines and automated machining lines.
• Furthermore, custom models can be manufactured to suit specific workpieces. Please contact us for consultation.

Duty Cycle: Continuous 100% ED
Voltage: DC 90 V
Applicable Round Steel Diameter: φ40–80 mm

※ The maximum holding force is based on a 2 mm thick steel plate.

Model	Dimensions (mm)							Maximum Holding Force (N)		Current (A)	Weight (kg)
	W	H	L	PW	PL	N	M	φ50	φ80
CEH-V815	75	100	150	50	80	4	M8 Depth 12	1570 (160 kgf)	1570 (160 kgf)	0.37	6.5
CEH-V823			225			6		2940 (300 kgf)	3332 (340 kgf)	0.56	10
CEH-V830			300		80 + 80	6		4410 (450 kgf)	5096 (520 kgf)	0.75	13

Operating Conditions for Electromagnetic Holders

[Allowable Temperature]
Use the holder at an ambient temperature of 40°C or less and with a workpiece temperature of 50°C or less. However, if you plan to use it in a higher-temperature environment, please consult us in advance.

[Holding Force]
The holding force varies depending on conditions such as the material, shape, surface finish, and plate thickness of the workpiece. In addition, if full-surface contact is not possible, the workpiece cannot be held at its center of gravity, or strong impacts occur during transport, select a model with an appropriate safety margin. Please consult us in advance regarding specific operating conditions.

[Waterproofing / Rust Prevention]
The electromagnetic holder is not waterproof. Furthermore, the holding surface does not have a rust-prevention treatment; therefore, it cannot be used in environments such as clean rooms. However, custom specifications suitable for such environments can also be manufactured. Please consult us for details.

[Residual Magnetic Attraction]
Even after switching the power OFF, a small amount of residual magnetic holding force remains. If the mass of the held object exceeds this residual magnetic force, there is no problem. However, in other cases, models other than the automatic release type (CEH-R) require a demagnetizing rectifier (TPRC-R) equipped with a reverse-excitation magnetic circuit.