Manufacturer: TECHNOPLAN
Model: CPB series

Round-Type Magnet Bar

<Applications>

• Install the magnet bar in liquid flow paths, tanks, or powder conveying ducts to remove iron contaminants.

<Features>

• Both end faces are available with or without tapped holes.
• For use in liquids other than oil, select the sealed welded type.
• In addition, this magnet bar is used in grid-type magnets.

Notes

• The sealed welded type features a high-quality sanitary finish. Therefore, it is suitable for environments that require strict hygiene control, such as food and pharmaceutical applications.
• However, the crimped type is not suitable for use in non-oil liquids, such as water. In such cases, always select the sealed welded type.

Model				Length (mm)	Diameter (mm)	Maximum Surface Magnetic Flux Density (mT)	Maximum Operating Ambient Temperature (°C)	Weight (kg)
Crimped Type		Hermetically Welded Type
Without Tapped Hole	With Tapped Hole (M5 × 0.8 ×L7)	Without Tapped Hole	With Tapped Hole (M5 × 0.8 × L7)
CPB-10	CPB-10-T	CPB-10M	CPB-10M-T	95	φ25	280 (2800 G)	Approx. 80	0.3
CPB-15	CPB-15-T	CPB-15M	CPB-15M-T	145				0.4
CPB-20	CPB-20-T	CPB-20M	CPB-20M-T	194				0.5
CPB-25	CPB-25-T	CPB-25M	CPB-25M-T	244				0.55
CPB-30	CPB-30-T	CPB-30M	CPB-30M-T	295				0.65
CPB-35	CPB-35-T	CPB-35M	CPB-35M-T	343				0.8
CPB-40	CPB-40-T	CPB-40M	CPB-40M-T	393				0.9
CPB-50	CPB-50-T	CPB-50M	CPB-50M-T	493				1.1
CPB-60	CPB-60-T	CPB-60M	CPB-60M-T	592				1.34