TECHNOPLAN
TECHNOPLAN CPBS Series Square-Type Magnet Bar
Manufacturer: TECHNOPLAN
Model: CPBS series
Square-Type Magnet Bar
<Applications>
- Install the magnet bar in liquid flow paths, tanks, or powder conveying ducts to remove iron contaminants.
<Features>
- Both end faces are available with or without tapped holes.
- In addition, this magnet bar is used in grid-type magnets.
- Furthermore, depending on the application, you can choose between two types: the standard type (ferrite magnet) and the high-power type (neodymium magnet).
| Model | Length (mm) | Square Side (mm) | Maximum Surface Magnetic Flux Density (mT) | Maximum Operating Ambient Temperature (°C) | Weight (kg) | |
|---|---|---|---|---|---|---|
| Without Tapped Hole | With Tapped Hole (M5 × 0.8 × L7) | |||||
| CPBS-20 | CPBS-20-T | 194 | □25 | 230 (2300 G) | Approx. 80 | 0.5 |
| CPBS-25 | CPBS-25-T | 244 | 0.55 | |||
| CPBS-30 | CPBS-30-T | 295 | 0.65 | |||
| CPBS-35 | CPBS-35-T | 343 | 0.8 | |||
| CPBS-40 | CPBS-40-T | 393 | 0.9 | |||
| CPBS-50 | CPBS-50-T | 493 | 1.1 | |||
| CPBS-60 | CPBS-60-T | 592 | 1.34 | |||
| Model | Length (mm) | Square Side (mm) | Maximum Surface Magnetic Flux Density (mT) | Maximum Operating Ambient Temperature (°C) | Weight (kg) | |
|---|---|---|---|---|---|---|
| Without Tapped Hole | With Tapped Hole (M5 × 0.8 × L7) | |||||
| CPBS-N20 | CPBS-N20-T | 194 | □25 | 400 (4000 G) | Approx. 80 | 0.5 |
| CPBS-N25 | CPBS-N25-T | 244 | 0.55 | |||
| CPBS-N30 | CPBS-N30-T | 295 | 0.65 | |||
| CPBS-N35 | CPBS-N35-T | 343 | 0.8 | |||
| CPBS-N40 | CPBS-N40-T | 393 | 0.9 | |||
| CPBS-N50 | CPBS-N50-T | 493 | 1.1 | |||
| CPBS-N60 | CPBS-N60-T | 592 | 1.34 | |||
Related Products
REQUEST QUOTATION
PAYMENT
LINK
