ENDO KOGYO, Hook, Japan, Lifting
ENDO KOGYO BC2 Air Balancer (With Lift Control Module)
General information
Product Made in Japan
Manufacturer: ENDO KOGYO
Dual balancing module
Hoisting capacity 0～140kg
Model: BC2
Main function of BC2
This is a dual balancing module type.
Balance a suspended load that is specified within the range of 0 to the maximum hoisting capacity.
Since you can specify two different loads, this module is ideal for the movement and installation of suspended loads.
You can manually perform a balancing operation over the full range of a stroke.
The fall-arrest device prevents the load from dropping even if the air supply is shut off or when the pendant switch hose breaks.*
* The load will descend slowly when the air supply is shut off.
You can easily perform the load setting with the regulator on the side of the main equipment and the load switching using the button control.
Switching with a two-handed handle is available to make the button control easier (BC2-H). 。
Specification
Control module specifications of BC2
| Name | Model | Hose | Mass(kg) |
| Dual balancing module | BC2 | Straight×3 Coil×3 | 4 |
| Dual balancing module | BC2-H | Straight×3 Coil×3 | 4 |
Air Balancer Series (Wire rope) Specification
| Model | Air pressure (MPa) | Hoisting capacity(kg) for lifting | Stroke (m) | Main equipment mass (kg) | Wire rope diameter (mm) | Air inlet |
| EHB-50S | 0.7 | 55 | 0.7 | 19 | Φ4.76 | Rc 3/8 |
| 0.6 | 48 | |||||
| 0.5 | 40 | |||||
| 0.4 | 32 | |||||
| EHB-50 | 0.7 | 55 | 1.9 | 28 | Φ4.76 | Rc 3/8 |
| 0.6 | 48 | |||||
| 0.5 | 40 | |||||
| 0.4 | 32 | |||||
| EHB-85 | 0.7 | 90 | 1.9 | 29 | Φ4.76 | Rc 3/8 |
| 0.6 | 75 | |||||
| 0.5 | 62 | |||||
| 0.4 | 50 | |||||
| EHB-130 | 0.7 | 140 | 1.9 | 36 | Φ4.76 | Rc 3/8 |
| 0.6 | 120 | |||||
| 0.5 | 100 | |||||
| 0.4 | 80 |
Air Balancer Series(Load chain) Specifications
| Model | Air pressure (MPa) | Hoisting capacity(kg) for lifting | Stroke (m) | Main equipment mass (kg) | Link chain (Dia. x No. of falls) | Air inlet |
| EHB-50SC | 0.7 | 55 | 0.65 | 20 | 4.0×1 | Rc 3/8 |
| 0.6 | 48 | |||||
| 0.5 | 40 | |||||
| 0.4 | 32 | |||||
| EHB-50C | 0.7 | 55 | 1.8 | 29 | 4.0×1 | Rc 3/8 |
| 0.6 | 48 | |||||
| 0.5 | 40 | |||||
| 0.4 | 32 | |||||
| EHB-85C | 0.7 | 90 | 1.8 | 30 | 4.0×1 | Rc 3/8 |
| 0.6 | 75 | |||||
| 0.5 | 62 | |||||
| 0.4 | 50 | |||||
| EHB-130C | 0.7 | 140 | 1.8 | 37 | 4.0×1 | Rc 3/8 |
| 0.6 | 120 | |||||
| 0.5 | 100 | |||||
| 0.4 | 80 |
Accessories
-Rail System
This system allows horizontal movement of lifting equipment, enabling easy transportation and transfer by hand.
Details
A floor-mounted jib crane is available as an accessory.
The traveling rail is made of aluminum, enabling light and smooth operation.
Details
Kouei is Distributor/Agent of Endo Kogyo.
Other items of Endo Kogyo
Request the quotation for Endo Kogyo
Related Products
-
KITAGAWA JM200 Work Grippers
-
Gentos MG-32SB Rechargeable Batterry
-
Chiyoda Seiki Gas Saver/Pressure Regulator With Dial Type Flow Meter Econo Dial Series H Type Econo Cube EC-S Type For Piping (With Adjuster)
-
KETT ELECTRIC LABORATORY PQ-520 Single Kernel Grain Moisture Tester
-
Nippon Chemical Screw POM/WB(M-L) POM/Butterfly Bolt
-
Kimoto Cable Protector Rubber Products
