Daiwa Kenko, Japan
Daiwa Kenko DG Hydraulic Load Measuring Gauge
Manufacturer: Daiwa Kenko
Model: DG-10; DG-15; DG-20; DG-25; DG-30; DG-35; DG-40; DG-50
The DG type Hydraulic Load Measuring Gauge was developed to measure the axial force applied to the girder in the root cutting and mountain retaining work, but in recent years, the need as a test piece for the seismic isolation method has been increasing.
Example of use
Specification
| Model No | DG-10 | DG-15 | DG-20 | DG-25 | DG-30 | DG-40 | DG-50 |
|---|---|---|---|---|---|---|---|
| Yield strength (KN) | 1,000 | 1,500 | 2,000 | 2,500 | 3,000 | 4,000 | 5,000 |
| Stroke (mm) | 15 | 30 | |||||
| Thickness (mm) | 190 | 200 | 210 | 230 | 270 | 280 | |
| Outer diameter (mm) | 210 | 240 | 255 | 275 | 310 | 340 | 405 |
| Weight (Kg) | 40 | 50 | 60 | 67 | 96 | 135 | 210 |
Related Products
-
Horiuchi FB Tie Rod Type Cylinder T Series
-
Okabe A80-0220 Safety Net Hook (Pipe)
-
TONE CPS-200G Combination Slim Pliers
-
Ascon ACR New Wet Blaster
-
KANSAI SC-8, SB-40 Titanium Shackle (Pure Titanium, 64 Alloy Titanium)
-
KONAN AVW344N-08 4 Port Air Operated Valves Large-Capacity Poppet-type Normally Open
