Japan, Taiyo Parker
TAIYO DP Series Hydraulic (Tie-Rod Type High-TemperatureeCylinder）
Made in japan
Manufacturer: TAIYO
Model: DP Series
Feature:
It could puncture round hole and square hole without any guide.
The external size is samll, so it could saving space for lined up installation.
It could setting the punch directly on the rod end.
The length of stroke is possible to puncture depth concave under face.
Specification:
| Action Style | Basic | With Non-rotating |
|---|---|---|
| Model Numbers | DPR | DPS |
| Aailable Bores(mm) | φ26,φ40,φ50 | φ40,φ50 |
| Cylinder Stroke | 30/50/75/100/125/150mm | 30/50/75/100/125/150mm |
| Max. Allowable Pressure | 14MPa | |
| Min. Working Pressure | 0.6MPa | |
| Operating Temperature | -10 to +80 Celsius Degree(But do not use when frozen) When using exceeds this temperature, the gaskets are damaged. | |
| Working Fluid | Petroleum-based fluid | |
| Note1)Rot End Run-out | less than 0.05mm | less than 0.03mm |
| Remarks | Rotation Run-out/less than 0.03mm (The run-out of rod diameter when rotate without load.) | Rotation Angle/less than 0.3 Degree (Without Torque) |
| Adjustment | Round Hole | Square Hole/Different Diameter Hole |
| Accessories | One set screw for retainer-nut. | One set screw for retainer-nut./One Spring Pin |
Related Products
-
Hachiken QA Expansion Sleeve
-
SHOWA SOKKI 4001B-50 Charge amplifier for force sensor and pressure sensor
-
Chiyoda Tsusho M4/6 MALE CONNECTOR［METAL BODY]
-
Watanabe AS-203A Digital scaling meter – Digital Panel Meter
-
Saitamaseiki AK-130 Die grinders and Y-Brush
-
Tokyo Sokushin Intensity Meter VIP-18 Seismic Monitor
