Japan, Kitagawa
KITAGAWA CK(R) Series NC Rotary Table
Made in Japan
Manufacturer: Kitagawa
Model :CK(R) Series
Feature:
Ultra compact body and smallest footprint NC rotary table
Suitable for using with trunnion jig
Block-less rotary joint (CKR160 and CKR200)
Suitable for small footprint machining centres
*CE correspondence
Specification
Model | CK160 | CKR160 | |||
---|---|---|---|---|---|
Right-handed type | ○ | ○ | |||
Left-handed type | ○ | ○ | |||
Table Diameter (mm) | ø114 | ø114 | |||
Centre Hole Diameter (mm) | ø65H7 | ø65H7 | |||
Through Hole Diameter (mm) | ø65 | – | |||
Centre Height (mm) | 140 | 140 | |||
Clamping Method | Pneumatic | Pneumatic | |||
Clamping Torque (N・m) (at 0.5 MPa) |
340 | 340 | |||
Motor Axis Reduction Inertia (kg・m2) | 0.00009 | 0.00009 | |||
Servomotor (for Fanuc spec.) | αiF 2/5000-B | αiF 2/5000-B | |||
Total Reduction Ratio | 1/72 | 1/72 | |||
Max. Rotation Speed (min-1) | 41.6 (at motor 3000min-1) |
41.6 (at motor 3000min-1) |
|||
Allowable Work Inertia (kg・m2) | 0.51 | 0.51 | |||
Indexing Accuracy (sec) | 20 | 20 | |||
Repeatability (sec) | 4 | 4 | |||
Mass of Product (kg) | 40 | 41 | |||
Allowable Load | Horizontal (kg) | 160 | 160 | ||
Vertical (kg) | 80 | 80 | |||
Tail Spindle (as an option) | MSRC140/TSRC140 MSR142A/TSR142A |
MSRC140/TSRC140 MSR142A/TSR142A |
|||
Rotary Joint (as an option) | – | Hydraulic/Pneumatic 7 ports Note 1) |
Related Products
-
Nesstech TBBA Liquid/Gas Expansion Temperature Gauge (Remote)
-
Chiyoda Seiki DSS-40/-60/-100 Dry Safety Device – Gas Collecting Device – For Piping Installation – Large Flow Type
-
Kyowa KFU120 Ohm 3-axis Overlapping Arrangement KFU High Temperature Foil Strain Gauge (350℃)
-
Kyowa RA01-5T Rubber Attachment Sensor/Transmitter Accessories
-
Ebara IDROGO 40/10 Submersible Water Pump
-
Takeda Machinery 3BF-1050III Full Automatic H/I Beam Drilling Machine