Japan, NPK
NPK NW-800(S), SW-12(R), NW-800S(S) Impact Wrench (One Hammer)
Made in: Japan
Manufacturer: NPK
Model : NW-800(S), SW-12(R), NW-800S(S)
Impact Wrenches (One-hammer)
The One-Hammer Impact wrenches are mostly used in repair and garage work shops. These wrenches have distinguishing features of being light weight, low in air consumption, exceptionally powerful impacting per blow. Built-in power reguration for easy adjustment.
Specification
*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)
Model | Capacity (Bolt size) |
Free Speed |
Overall Length |
Mass | Spindle Offset |
Square shank size |
Air inlet thread | Hose size | Average air consumption |
mm | min-1 | mm | kg | mm | mm | Rc | mm | m3/min | |
NW-800 | 10 | 7,000 | 128 | 1.25 | 22.5 | 9.5 | 1/4 | 6.3 | 0.1 |
SW-12 | 12 | 8,000 | 124 | 1.26 | 27 | 9.5 | 1/4 | 6.3 | 0.1 |
NW-800S | 10 | 8,000 | 178 | 1.1 | 25 | 9.5 | 1/4 | 6.3 | 0.1 |
NW-1200B | 14 | 7,000 | 174 | 1.8 | 28 | 12.7 | 1/4 | 6.3 | 0.1 |
NW-1200B(2R) | 14 | 7,000 | 224 | 2.1 | 28 | 12.7 | 1/4 | 6.3 | 0.1 |
NW-1600HA | 16 | 5,000 | 195 | 2.5 | 31.8 | 12.7 | 1/4 | 6.3 | 0.15 |
NW-1600HA(2R) | 16 | 5,000 | 244 | 5.7 | 31.8 | 12.7 | 1/4 | 6.3 | 0.15 |
NW-1600HA-AT | 16 | 5,000 | 194 | 2.5 | 32.5 | 12.7 | 1/4 | 6.3 | 0.15 |
NW-1600SA | 14 | 6,500 | 165 | 1.6 | 26 | 12.7 | 1/4 | 6.3 | 0.15 |
NW-2000HA | 20 | 4,500 | 230 | 3.8 | 38 | 19.05 | 1/4 | 9.5 | 0.2 |
NW-2000HA(4R) | 20 | 4,500 | 330 | 4.2 | 38 | 19.05 | 1/4 | 9.5 | 0.2 |
NW-2800P | 25 | 5,000 | 225 | 5 | 41.5 | 19.05 | 3/8 | 9.5 | 0.25 |
NW-3500P | 36 | 4,000 | 280 | 9.2 | 50 | 25.4 | 3/8 | 12.7 | 0.3 |
NW-3500GB | 36 | 4,000 | 388 | 9.5 | 50 | 25.4 | 3/8 | 12.7 | 0.3 |
NW-3500GB(6P) | 36 | 4,000 | 551 | 10.5 | 50 | 25.4 | 3/8 | 12.7 | 0.3 |
NW-4000 | 33 | 2,700 | 368 | 7.4 | 49.5 | 25.4 | 3/8 | 9.5 | 0.3 |
NW-4000(6P) | 33 | 2,700 | 521 | 8.4 | 49.5 | 25.4 | 3/8 | 9.5 | 0.3 |
NW-4300GA | 42 | 4,000 | 453 | 12.9 | 57 | 25.4 | 1/2 | 12.7 | 0.4 |
NW-4300GA(6P) | 42 | 4,000 | 590 | 14.2 | 57 | 25.4 | 1/2 | 12.7 | 0.4 |
NW-5000 | 52 | 3,000 | 464 | 16.5 | 62 | 25.4 | 1/2 | 12.7 | 0.45 |
NW-5000(7P) | 52 | 3,000 | 642 | 18 | 62 | 25.4 | 1/2 | 12.7 | 0.45 |
Related Products
-
Eagle Clamp ECAR Type Intact Clamp for PC Plate
-
Kyowa 3RT01-PE7M connector
-
Matsuda Seiki Air Leak Tester Machines
-
Obishi Keiki Seisakusho Head Spin Type Vertical -Type Bench Centers ( SVP Type )
-
Chiyoda Seiki PH-10 Flexible Hose Assembly Device Components Container Connecting Pipe
-
Tohnichi QSPLS/CSPLS/QRSPLS/SPLS/SPLS-MH/RSPLS/RSPLS-MH/SPLS-N Interchangeable Head Torque Wrenches