Japan, NPK
NPK Die Grinders
Made in: Japan
Manufacturer: NPK
Die Grinders
Die grinders are suitable for precise, delicate finishing as required in handling small points and burrs.
Specification
＊Specificatioins are subject to change without notice.
＊Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)
| Model | type | collet size | Max. free speed | Over- all length | Mass | Air inlet thread | Hose size | Average air con- |
| min-1 | mm | kg | Rc | mm | m3/min | |||
| RG-16BK-06 | Lever | 6mm | 38,000 | 178 | 0.4 | 1/4 | 6.3 | 0.25 |
| RG-25-06 | Lever | 6mm | 30,000 | 174 | 0.52 | 1/4 | 6.3 | 0.4 |
| RG-25-20 | Lever | 1/4″ | ||||||
| RG-382B-06 | Grip | 6mm | 25,000 | 184 | 0.5 | 1/4 | 9.5 | 0.5 |
| RG-382B-20 | Grip | 1/4″ | ||||||
| RG-383A-06 | Lever | 6mm | 25,000 | 178 | 0.6 | 1/4 | 9.5 | 0.5 |
| RG-383A-20 | Lever | 1/4″ | ||||||
| RG-38CA-06 | Grip | 6mm | 22,000 | 189 | 0.5 | 1/4 | 9.5 | 0.5 |
| RG-38CA-20 | Grip | 1/4″ | ||||||
| RG-38CX-06 | Lever | 6mm | 22,000 | 183 | 0.6 | 1/4 | 9.5 | 0.5 |
| RG-38CX-20 | Lever | 1/4″ | ||||||
| RG-16BKLW-06 | Lever | 6mm | 38,000 | 178 | 0.4 | 1/4 | 6.3 | 0.25 |
| RG-16BKLW-20 | Lever | 1/4″ | ||||||
| RG-25LW-06 | Lever | 6mm | 30,000 | 176 | 1.1 | 1/4 | 6.3 | 0.4 |
| RG-25LW-20 | Lever | 1/4″ |
Related Products
-
Kondotec Ship’s Snatch Blocks
-
EXEN RKV80PA Relay Knocker (Vibe Type)
-
Chiyoda Seiki EX-100mkII Excellent Mark II (Primary pressure: 20.0 MPa or less/adjustment pressure 0.1 to 1.0 MPa, maximum flow rate: 50 ℓ, 150 ℓ/min・Air)
-
Kanetec KCT-Series Water Cooled Electromagnetic Chuck
-
DAIA MDB Series Quick Ring Burner
-
Fukudaco Forsheda V-Ring
