Japan, NPK
NPK New Kelens
Made in: Japan
Manufacturer: NPK
New Kelens
These are also scalers for removing scale and rust of ships or concrete dross in mixer agitators.
Specification
*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)
Model | Blow per minute | Piston diameter | Piston stroke | Overall length | Mass | Air inlet thread | Hose size | Average air consumption |
min-1 | mm | mm | mm | kg | Rc | mm | m3/min | |
NNK-250 | 4,000 | 25.4 | 23 | 514 | 3.4 | 3/8 | 9.5 | 0.45 |
NNK-500 | 4,000 | 25.4 | 23 | 744 | 4.2 | 3/8 | 9.5 | 0.45 |
NNK-750 | 4,000 | 25.4 | 23 | 1,034 | 5.0 | 3/8 | 9.5 | 0.45 |
NNK-1000 | 4,000 | 25.4 | 23 | 1,284 | 5.8 | 3/8 | 9.5 | 0.45 |
NNK-1500 | 4,000 | 25.4 | 23 | 1,784 | 7.4 | 3/8 | 9.5 | 0.45 |
Related Products
-
Nitta Curve Belt List
-
Hammer Caster 220G Stainless Steel Corner Caster
-
Kyowa LB-100KB LB-B Hand Brake Operating Force Transducer
-
Kansai Kogu 1300008180,1300108180,1300209180 Flat Vent Air Hammer Chisel
-
YOSHITAKE TAV-2 Air Vent Valve with Vacuum Breaker
-
Chiyoda Seiki SGX-50 Small/Medium/Large flow/Pressure regulator/Governor Small/medium/large flow Rate Governor (primary pressure: 1.0 to 35.0 kPa/set pressure 0.5 to 20.0 kPa)