Leveraging Today’s Most Advanced Hoisting Technology, This High-performance Hoist Exceeds the Expectations of Even the World’s Most demanding Users.

Compact Body – Lightweight

The compact aluminum die-cast body features exceptional rigidity and effective protection against dust and water. It has a simple structure and uses minimal parts, while the fine-tuned load-chain profile better exploits the lighter hoist body weight compared to the previous ER.

Smooth and Ergonomic Operation

1. Inverter – Smooth Transitional Speed
   The dual-speed inverter delivers smoother movement than the pole change motor, reducing the load swing, while the high-to-low speed ratio can be set to a large value. These allow smooth starts and improve low-speed stops and positioning accuracy. The standard speed ratio is 6:1; adjustable up to 12:1* for lifting and 10:1* for traversing.
   * For non-standard speed ratios, please request them when placing order.
2. Original Push Button Control
   Your comfort and safety are assured with push button pendants that are fitted with ergonomic controls and an emergency stop button.
3. Load Sheave-reduced Vibration
   Increasing the number of load sheave pockets helps relieve vibrations produced by the revolving polygonal sheave on the hoist’s body and load chain.

Reliable Safety: Friction Clutch and Upper-lower Limit Switch

1. Long-life Friction Clutch
   The friction clutch prevents damage to the hoist by automatically engaging in the event of an excessive overload. When the friction clutch engages, the motor is allowed to continue turning protecting both you and the hoist.
2. Durable Upper/Lower Limit Switch
   The limit switch stops working if either end of the load chain comes into contact with the hoist body; protecting against unnecessary downtime and service costs. The ER2’s redesigned upper-lower limit switch features enhanced durability and a low-profile design for improved hoist headroom.

Reliable Safety: Thermal Protector and Magnetic Brake

1. Thermal Protector
   To prevent motor burnout due to excessive usage, a standard thermal protector is installed in the motor.
2. Magnetic Brake – Failsafe Brake
   KITO’s DC-current brake design reduces maintenance costs by eliminating initial drag and responding immediately on stoppage. This also exposes the motor to less torque for ultra-quiet and smooth operation. Unlike voltage brakes, the advanced technology used in KITO’s DC-current brake protects against hoist failure in the event of motor burnout or single-phasing.
   >10-year/ 2,000,000 cycle brake warranty
   >No adjustment needed
   >Electrical failsafe design

Reliable Safety: Emergency Stop

Enhanced Durability: High-end Duty Rating with Unique Motor Frame Fins and Fan Cover

1. High-end Duty Rating
   The ER2 achieves M6 (ISO)/3 m (FEM) class with a duty cycle of 60% ED. Supporting use under the most demanding environments and conditions, this long-service-life hoist is a heavy-duty product which can also handle high-frequency or long-lift operations.
2. Unique Motor Frame Fins and Fan Cover
   A unique fan-cooled motor with motor frame fins and a fan cover have been combined in this purpose-built design. This design produces a much quieter motor unit as well as enhanced fan cooling capabilities, while the aluminum die-cast motor frame with external motor fan limits any heat-up during frequent operation.

Enhanced Durability: Super-strong, Corrosion- and Wear-resistant Load Chain

Easier Maintenance: Suspension and Easy Maintenance Control Panel

1. Suspension
   The hoist can easily be changed from a hook to a lug-mount configuration with external suspension pins on most models.
2. Easy Maintenance Control Panel
   Simple layout of controls and a single swing-down panel. The captured control cover comes complete with a standard wiring diagram for swift on-site access.

Easier Maintenance: CH (Counter Hour) Meter (Inside Inverter for Dual Speed)

This standard feature shows the cumulative hours of hoist operation and the number of lowering starts on the LCD of the CH meter, which allows the user to maintain the unit based on the frequency of use. By maintaining historical CH meter data, the inspection and replacement periods for gear oil, contactors, brakes and load chains can be efficiently controlled; allowing the equipment to be used with confidence.

Environmentally Friendly

1. No Hazardous Substances
   Built smarter, eliminating the use of harmful materials. Environmentally friendly and RoHS-compliant.
2. Energy Saving
   Allows energy to be saved due to the reduction in rated current draw compared to the previous ER.
3. Low-noise
   The utilization of the inverter, 4-pole motor as well as the electromagnetic brake, reduces the noise during operation and braking.

Specifications & Dimensions

Dual Lifting Speed ‘Inverter’ – Single Traversing Speed with Motorized Trolley

The dual lifting speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Trav. Motor	Traversing Speed (m/min)		Net Wt. (kg)
			Output (kW)		50/60Hz		Output (kW)	50Hz	60Hz
					High	Low
ER2M 001IH -S/L	125kg	3	0.56	Preset	16.6	2.8	0.4	20 (10)	24 (12)	58
				Adjust- able		1.4
ER2M 005IS -S/L	500kg		0.9	Preset	8.5	1.4				67
				Adjust- able		0.7
ER2M 010IS -S/L	1		1.8	Preset	8.2	1.4				82
				Adjust- able		0.7
ER2M 020IS -S/L	2		3.5	Preset	8.2	1.4				127
				Adjust- able		0.7
ER2M 030IS -S/L	3			Preset	5.2	0.9				153
				Adjust- able		0.4

• The bracketed figures in Traversing Speed are low speed.
• The minimum radius curve may depend on flange width.
• For further information, contact KITO and KITO’s global partners.

• * The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.\

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001IH-S/L	375	450	315	220	515	205
ER2M005IS-S/L	395	510
ER2M010IS-S/L	435	550
ER2M020IS-S/L	585	630	325	225	520	212
ER2M030IS-S/L	765	900	340	226	521	215

Dual Lifting Speed 500V ‘Pole Change’ – Single Traversing Speed with Motorized Trolley

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code	Cap. (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)	Trav. Motor	Traversing Speed (m/min)	Net Wt. (kg)
			Output (kW)	50Hz	Output (kW)	50Hz
ER2M001HD -S/L	125kg	3	0.5/0.13	14.2/3.5	0.4	20 (10)	62
ER2M005SD -S/L	500kg		0.9/0.23	7.1/1.8			74
ER2M010SD -S/L	1		1.8/0.45	7.2/1.7			88
ER2M020SD -S/L	2		3.5/0.88	6.9/1.6			135
ER2M030SD -S/L	3			4.4/1.0			161

• The bracketed figures in Traversing Speed are low speed.
• The minimum radius curve may depend on flange width.
• For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001HD-S/L	375	450	315	268	515	205
ER2M005SD-S/L	395	510
ER2M010SD-S/L	435	550
ER2M020SD-S/L	585	630	325	273	520	212
ER2M030SD-S/L	765	900	340	274	521	215

Dual Lifting ‘Inverter’ – Dual Traversing Speed ‘Inverter’ with Motorized Trolley

The dual speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Trav. Motor	Traversing Speed* (m/min)		Net Wt. (kg)
			Output (kW)		50/60Hz		Output (kW)	50/60Hz
					High	Low		High	Low
ER2M 001IH -IS	125kg	3	0.56	Preset	16.6	2.8	0.4	Preset 24 ——- Adjust- able 24	Preset 4 ——- Adjust- able 2.4	59
				Adjust- able		1.4
ER2M 005IS -IS	500kg		0.9	Preset	8.5	1.4				69
				Adjust- able		0.7
ER2M 010IS -IS	1		1.8	Preset	8.2	1.4				84
				Adjust- able		0.7
ER2M 020IS -IS	2		3.5	Preset	8.2	1.4				129
				Adjust- able		0.7
ER2M 030IS -IS	3			Preset	5.2	0.9				155
				Adjust- able		0.4

• The minimum radius curve may depend on flange width.
• For further information, contact KITO and KITO’s global partners.

• * The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001IH-IS	375	450	315	220	515	205
ER2M005IS-IS	395	510
ER2M010IS-IS	435	550
ER2M020IS-IS	585	630	325	225	520	212
ER2M030IS-IS	765	900	340	226	521	215

 

Dual Lifting Speed 500V ‘Pole Change’ – Dual Traversing Speed 500V ‘Pole Change” with Motorized Trolley

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code	Capacity (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)	Trav. Motor	Traversing Speed (m/min)	Net Weight (kg)
			Output (kW)	50Hz	Output (kW)	50Hz
ER2M001 HD-SD	125kg		3	0.5/0.13	14.2/3.5	0.32/0.08	20/5	66
ER2M005 SD-SD	500kg	0.9/0.23		7.1/1.8	77
ER2M010 SD-SD	1	1.8/0.45		7.2/1.7	92
ER2M020 SD-SD	2	3.5/0.88		6.9/1.6	138
ER2M030 SD-SD	3			4.4/1.0	0.64/0.16	164

• The minimum radius curve may depend on flange width.
• For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001HD-SD	375	450	315	268	515	205
ER2M005SD-SD	395	510
ER2M010SD-SD	435	550
ER2M020SD-SD	585	630	325	273	520	212
ER2M030SD-SD	765	900	340	274	521	215

 

Single Lifting Speed – Single Traversing Speed with Motorized Trolley

The single speed delivers high speed and contributes operation efficiency.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)		Trav. Motor	Traversing Speed (m/min)		Net Weight (kg)
			Output (kW)	50Hz	60Hz	Output (kW)	50Hz	60Hz
ER2M001H -S/L	125kg	3	0.56	14.1	16.9	0.4	20 (10)	24 (12)	58
ER2M005S -S/L	500kg		0.9	7.3	8.8				68
ER2M010S -S/L	1		1.8	7.1	8.5				84
ER2M020S -S/L	2		3.5	7.0	8.4				129
ER2M030S -S/L	3			4.4	5.3				155

• The bracketed figures in Traversing Speed are low speed.
• The minimum radius curve may depend on flange width.
• For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001H-S/L	375	450	315	220	515	205
ER2M005S-S/L	395	510
ER2M010S-S/L	435	550
ER2M020S-S/L	585	630	325	225	520	212
ER2M030S-S/L	765	900	340	226	521	215

Large Capacity with Motorized Trolley

The large capacity model is suitable for using with the middle and large crane.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)		Trav. Motor	Traversing Speed (m/min)		Net Weight (kg)
			Output (kW)	50Hz	60Hz	Output (kW)	50Hz	60Hz
ER2M075 S-L	7.5	3	3.5	1.9	2.3	0.75	10	12	283
ER2M100 L-L	10			1.4	1.7				378
ER2M100 S-L			3.5 × 2	2.9	3.5	0.75 × 2			399
ER2M150 S-L	15			1.9	2.3				571
ER2M200 S-L	20			1.4	1.7				628

• Trolley wheels for tapered I-beam are provided as standard.
• The wheels for flat flange beam are also available so make a request in advance if necessary.
• The minimum radius curve for 7.5 and 10 ton may depend on flange width.
• For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	g	w
ER2M075S-L	1165	1230	500	284	61	672
ER2M100L-L	1180	1210			80	728
ER2M100S-L		1020				956
ER2M150S-L	1310	1230	1020		86	1129
ER2M200S-L	1345				102	1305