Product Made in Japan

Manufacturer : Matsumoto Kikai

Model : PEV-10-S ~ 50-S

EV 3-axis positioner “TETSUJIN” has 3 axes (elevating, tilting, and rotating), and can position the workpiece in a position with good work efficiency, making it easy to obtain the optimum welding posture.

Features

• 3-axis movement for optimum positioning!
  You can freely obtain welding postures that were difficult with conventional positioners.
• Speedy rotation speed! (4 times compared to our company)!
  Speed ​​up the movement speed of each axis. In addition, the speed can be easily set by inverter control, so the efficiency is further improved with a sense of speed that matches the worker’s rhythm.
• Elevating function that does not stress workers!
  Since the working height can be freely positioned, workers can concentrate on welding work without having to take an unreasonable posture.
• Reliable fall prevention mechanism!
  A double safety mechanism prevents the lifting beam from falling.
• Shut out dust from the outside!
  The drive section is fully protected by a cover to prevent troubles caused by dust, spatter, etc. In addition, since all three axes are electrically driven, maintenance work is not a hassle.
• Smooth start/stop operation!
  Inverters are used for all three axes, enabling soft start and soft stop. In particular, it can be used safely and with peace of mind because it does not give impact to the main body of Tetsujin or the mounted work when it is stopped.
• It is also possible to correspond to the external axis specification of the robot.

PEV-20-L                                                                              PEV-50-L

Hollow chuck mounted type PEV-20-H
A positioner for pipe welding that can chuck a workpiece with a hollow chuck.
<design registered>

motion

Lifting motion
By lifting the work to a height that is easy to work with, the optimum welding posture that does not burden the worker can be obtained.

Tilt movement
With the arm tilting function, it is possible to weld both the front and back sides of the workpiece just by setting it on the table once.

rotary motion
The table rotates endlessly. Even if there are multiple welding points, workers can perform welding work on the spot without moving.

■ Abundant optional functions

• Teaching positioning function
  The stop position of the table can be set and stored in advance according to the work order, and the work position can be replayed each time the 1 step button is pressed. Greatly improves work efficiency.
• Collision prevention function
  By setting the work size in advance, the mounted work will automatically stop before it interferes or collides with the main body of Tetsujin or the floor.
• Servo motor specifications
• Table rotation speed change function
  The table rotation speed can be easily adjusted with the pendant speed volume. Stable circumference welding can be easily performed at the optimum welding speed.
• hydraulic rotary joint
  Equipped on the rotating shaft. Hydraulic oil can be supplied to hydraulic clamp jigs, etc. without any problems no matter how many times the table is rotated.
• Signal tower
  The operating status is indicated by a lamp, melody, and alarm sound.

Specifications

Model display:  ① 05: 500kg load – 50: 5000kg load ② S: Short arm L: Long arm

Note) ●The power supply voltage is AC3φ200V 50/60Hz. ●Specifications are subject to change without notice, so please refer to them when ordering.

Dimensions

* ( ) indicates long arm dimensions                                                                                                                    Unit: mm