Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 647 0.05 Circuit Tape
Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 647 0.05
No. 647 uses a polyester film that is coated with a highly heat and chemical resistant silicone adhesive.
There are 4 tape thicknesses available depending on adhesive thickness: 0.05, 0.08, 0.1 and 0.12mm. This tape can be used on various uneven surfaces and is optimal for plate masking in printed board terminal components.
Structure of 647 0.05
Features
- Heat resistance, Chemical resistance, Solvent resistance
- Less adhesive residue
- Good fit to printed circuit board
- 4 kinds of overall thickness
Uses
- For plating masking of terminals of printed circuit board
- Heat resistant masking
- Fixing parts required removability
- For fixing silicone rubber
- Fixing silicone-type release liner
|
Overall thickness (㎜)
|
0.050
|
|---|---|
|
Standard color
|
Green
|
|
Standard length (m)
|
60
|
|
Peel adhesion (N (gf) /W25㎜)
|
6.50(663)
|
|
Tensile strength (N/25㎜)
|
94.1
|
|
Elongation (%)
|
80
|
|
Standards met
|
─
|
The above data are typical examples measured using JIS or our corporate testing method.
RoHs2 directive 10substances are not contained.
Related Products
-
Kondotec Simple Set Scraffolding
-
Nakatani Kikai NAS5C Chipping Designated Angle Grinder (Diamond Cutter, 5 Inch Type)
-
Chiyoda Tsusho F4/6/8/10/12 Male Connector With Hex Key
-
WINOA IKK WA Clean Technology
-
Ross Asia Miniature series Port sizes 1/8″ and 1/4″. Flow rates up to 24 scfm (680 l/min)
-
Showa Seisakusho Welding Test Piece (Front Bending)
REQUEST QUOTATION
PAYMENT
LINK
