Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 647 0.1 Circuit Tape
Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 647 0.1
No. 647 uses a polyester film that is coated with a highly heat and chemical-resistant silicone adhesive.
There are 4 tape thicknesses available depending on adhesive thickness: 0.05, 0.08, 0.1 and 0.12mm. This tape can be used on various uneven surfaces and is optimal for plate masking in printed board terminal components.
Structure of 647 0.1
Features
- Heat resistance, Chemical resistance, Solvent resistance
- Less adhesive residue
- Good fit to the printed circuit board
- 4 kinds of overall thickness
Uses
- For plating masking of terminals of printed circuit board
- Heat resistant masking
- Fixing parts required removability
- For fixing silicone rubber
- Fixing silicone-type release liner
Overall thickness (㎜) | 0.100 |
|---|---|
Standard color | Green,Red |
Standard length (m) | Green:30、60 Red:60 |
Peel adhesion (N (gf) /W25㎜) | 7.30(744) |
Tensile strength (N/25㎜) | 94.1 |
Elongation (%) | 80 |
Standards met | ─ |
The above data are typical examples measured using JIS or our corporate testing method.
RoHs2 directive 10substances are not contained.
Related Products
-
Kokosha PJB2 Series ISO Side Scuttles Bolted Type (JIS Equivalent)
-
Kakuta No.82 Hold Down Clamp
-
ASCO Pressure-resistant Explosion-proof Solenoid Valve
-
Shimizu Long Handle Grass Cutting (handle length 1200mm)
-
Kimoto Spray nozzle Rubber Products
-
Kitz 10XJSME Aluminum Butterfly Valve Lever Operated (Short Neck Type)
