Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 465 #40 Film Masking Tape
Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 465 #40
No. 465 uses an acrylic adhesive that leaves little residue when removed and polypropylene film.
This tape is optimal for use during green sheet finishing on multilayered IC packages
Structure of 465 #40
Features
- Less adhesive residue.
- Adhesion after heating does not increase extremely
Uses
- For the stamping process of a green sheet of a semiconductor package with a multilayer board
- Masking. provisional ｆixation.
- Electrical insulation of electronic components
Overall thickness (㎜) | 0.050 |
|---|---|
Standard color | Transparent |
Standard length (m) | 100、200 |
Peel adhesion (N (gf) /W25㎜) | to PET 2.00(203) |
Tensile strength (N/25㎜) | 110.0 |
Elongation (%) | 150 |
Standards met | ─ |
The above data are typical examples measured using JIS or our corporate testing method.
RoHs2 directive 10substances are not contained.
Related Products
-
Chiyoda Seiki RF-400P Medium Flow Rate, Self-powered Pressure Regulator/Large Flow Rate, Pilot Type Pressure Regulator (Primary pressure: 0.2 MPa or less/adjustment pressure 0.003 to 0.02 MPa, standard flow rate: 150 m3/h・Air)
-
Tosei Sharyo GLSE Electrohydraulic Lifter
-
Fujii Denko 57C Pole Safety Belt
-
Saitamaseiki AK-551S Single Action and Double action Sanders
-
Chiyoda Seiki MCH-140 Semi-automatic Switching Gas Supply Device Stand Set (Standard flow rate: 60m3/h / Air)
-
TERAOKA SEISAKUSHO 6093 #25 Film Masking Tape
REQUEST QUOTATION
PAYMENT
LINK
