- Home
- Products
- SHOWA SOKKI 4035-50 Charge Amplifier for Vibration Measurement [General-purpose charge amplifier]
Japan, Showa Sokki
SHOWA SOKKI 4035-50 Charge Amplifier for Vibration Measurement [General-purpose charge amplifier]
Made in Japan
Manufacturer: SHOWA SOKKI
Model: 4035-50
Features
The charge amplifier MODEL-4035-50 is a high-precision charge amplifier that converts the charge signal output from the detector into a voltage signal. Various analyzes are possible by connecting. Please try the low-cost, high-precision charge amplifier as a charge amplifier for measurement and vibration monitoring of lines, etc.”
- High precision and low price are realized.
- A dynamic range of 100 dB or more, and can handle a wide range of acceleration from minute to large acceleration.
- A charge amplifier that is resistant to minute vibrations due to its low-noise design.
- Unnecessary noise components can be cut with high-pass and low-pass filters.
- Compatible with charge output type and preamp built-in type acceleration sensors.
- Measurement is possible from 1CH by using an AC adapter.
- A small, lightweight, high-performance charge amplifier with a built-in 7-stage range.
- Compatible with sensors with built-in amplifiers.
1CH/3CH configuration example
Specification
| input terminal | Isolated BNC connector |
| adaptive detector | Charge output detector (pC type), preamp built-in detector (mV type) |
| Constant current drive power supply | +24V, 3mA constant current (when using detector with built-in preamplifier) |
| Frequency characteristic | 0.5Hz to 100kHz・・・+1, -3dB 1Hz to 50kHz・・・±1dB 5Hz to 20kHz・・・±0.5dB |
| full scale sensitivity | Standard type (4035-50): 1 V/1 pC (mV) to 10,000 pC (mV) High sensitivity type (4035-51): 1 V/0.1 pC (mV) to 1,000 pC (mV) Large input type (4035-52) : 1V/10pC (mV) ~ 100,000pC (mV) Maximum input type (4035-53): 1V/100pC (mV) ~ 1,000,000pC (mV) |
| Measurement range (sensor sensitivity: range) | 1.00 to 9.99 pC (mV)/UNIT for standard type : 1, 3, 10, 30, 100, 300, 1,000 UNIT/V 10.0 to 99.9 pC (mV)/UNIT: 0.1, 0.3, 1, 3, 10, 30, 100 UNIT/V 100 to 999 pC (mV)/UNIT: 0.01, 0.03, 0.1, 0.3, 1, 3, 10 UNIT/V |
| output | AC output (BNC connector) Maximum output voltage ±10V (±1V/FS) However , range 300 has a maximum of ±3.16V and range 1,000 has a maximum of ±1V DC output (DSUB connector) Maximum output voltage +10V (+1V/FS) Range 300 up to +3.16V, Range 1,000 up to +1V |
| Noise level (typ.) | Full-band: (1) [0.008pCrms + 0.005pCrms for every 1,000pF of input capacitance], whichever is greater, or (2) 5mV (RMS) Narrow-band: 0.5Hz, 100pC/V・・・10μV/√Hz 20～1,000Hz, 100pC/V・・・1μV full band (mV): (1) 10μVrms input conversion value or ②5mVrms, whichever is larger |
| Accuracy | Within 1.5% for all ranges at 1,000 Hz and input capacitance of 1,000 pF or less |
| filter | LPF: 1,000Hz, 10,000Hz (-12dB/OCT) HPF: 3Hz, 10Hz (-12dB/OCT) |
| temperature, humidity range | -20°C to +60°C, 90% RH or less |
| power supply | DC±9V～±15V, or AC100～240V power supply unit can be used when built into multi-channel storage case with AC adapter |
| dimensions, mass | Dimensions: 34.5 (W) x 99 (H) x 152 (D) mm Refer to outline drawing Weight: Approx. 350g |
- Kouei is Distributor/Agent of SHOWA SOKKI
- Other items of SHOWA SOKKI
- Request the quotation for SHOWA SOKKI
Related Products
-
Magnescale SET-SC2020 Laserscale
-
REX ISO 7-1 (JIS 0203) Pipe Threading Machines Compatibility Tables
-
Kanetec KVR Vacuum Chucks
-
Arimitsu TRY Series Pressure Washer / High Pressure Jet Cleaners (Engine Type) Soundproof 3.7kW (5.0PS)-5.5kW (7.5PS)
-
SHIGEMATSU DD01V-S2-1 Dust Respirator
-
Chiyoda Seiki GS-3000P Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 15.0 MPa or less/adjustment pressure 0.2 to 1.5 MPa, standard flow rate: 2300 m3/h・Air)
