Japan, YAMARI INDUSTRIES, LIMITED
YAMARI CERA THERMO Thermocouple
Made in Japan
Manufacturer: YAMARI INDUSTRIES, LIMITED
Features
Ceramics-tubed wires or mineral insulated cables have conventionally been used in harsh environments. However, they posed serious problems in flexibility, connections, and the ratio of outer cable diameter to conductor diameter. Yamari has launched a flexible ceramic-insulated thermocouple wire, achieved through a new fabrication process, SLPC using a liquid phase process similar to an electrostatic spattering method.
Structure
Advantages
| 1. Easy to handle – – – – – – – – | No breakage at joints in insulators |
| 2. Space Saving – – – – – – – – | Virtually same diameter as bare wire |
| 3. Lightweight – – – – – – – – | Virtually same weight as bare wire |
| 4. High Flexibility – – – – – – – – | No insulators are necessary |
| 5. Low out gassing – – – – – – – – | Usable in super vacuum atmosphere |
Applications
Semiconductor processing equipment | Temperature distribution measurement of silicon wafer and P.C. board |
|---|---|
Vacuum equipment | Temperature measurement of P.C. board on spattering equipment, and various evaporation equipment |
CVD equipment, Heat treatment furnace, etc. | Temperature measurement of precision sintering furnace, etc. |
Thermocouple Wire
| Type of Thermocouple | K | ||
|---|---|---|---|
| Diameter (mm) | 0.2, 0.32 | ||
※Improper EMF may be generated, if hot junction and leads were made without removing ceramic layer.
CERATHERMO Thermocouple with hot junction
Related Products
-
TERAOKA SEISAKUSHO 5113 0.15 Epoxy Resin Impregnated Tape
-
TSUBOSAN Diamond Files S-Type #100 Diamond Files
-
Jasco FTIR 4X Fourier Transform Infrared Spectrophotometer (FTIR)
-
Hasegawa Electric HLA-3 Voltage Detector Checker（Handy Type）
-
Chiyoda Seiki TKR-140 Series Medium Flow Self-powered Pressure Regulator (Primary pressure: 20.0 MPa or less/adjustment pressure 0.2 to 1.5 MPa, standard flow rate: 155 m3/h・Air)
-
Nagasaki Jack NBP-500PW Bush changer with punching wagon
