Japan, UHT CORPORATION
UHT Corporation The Collets And Collet Nut For The Spindle No. 5 φ1.5
Made in Japan
Manufacturer: UHT CORPORATION
Model: The Collets And Collet Nut For The Spindle No. 5 φ1.5
The collets and collet nut for Spindle No. 5.
The 6.0-mm collet is included in Spindle No. 5 or Kit No. 5 by default.
The collet’s nominal diameters are the maximum dimensions to be held.
Note that when the difference between the shank diameter and the collet’s nominal diameter increases, the runout will also increase.
For example, the 6.0-mm collet can hold the 5.5-mm shank, but not the 6.3-mm shank.
The accuracy will become low with the 5.1-mm shank.
Use the 5.0-mm collet for the shank diameters of 5.0 mm or less.
Note that these collets require a long lead time.
Main Specifications
product name | The collets and collet nut for the Spindle No. 5 φ1.5 |
---|---|
Part number | 5009008 |
Related Products
-
Vessel No.QB-22V Ball Quick Catcher (Vioret)
-
Kansai Kogu 22T0 Series Tapered Shank Drill (Long Sized)
-
Hammer Caster 439G-UR Urethane Thermoplastic Wheel
-
Kyowa Tee Ends Male
-
Vessel No.TD(straight type series) Flat-shaped Ratchet Screwdriver
-
SAKUSAKU CCGT09T304-UF Turning Insert 80° Rhombic/7° Positive