Japan, UHT CORPORATION
UHT Corporation The Collets And Collet Nut For The Spindle No. 5 φ2.0
Made in Japan
Manufacturer: UHT CORPORATION
Model: The Collets And Collet Nut For The Spindle No. 5 φ2.0
The collets and collet nut for Spindle No. 5.
The 6.0-mm collet is included in Spindle No. 5 or Kit No. 5 by default.
The collet’s nominal diameters are the maximum dimensions to be held.
Note that when the difference between the shank diameter and the collet’s nominal diameter increases, the runout will also increase.
For example, the 6.0-mm collet can hold the 5.5-mm shank, but not the 6.3-mm shank.
The accuracy will become low with the 5.1-mm shank.
Use the 5.0-mm collet for the shank diameters of 5.0 mm or less.
Note that these collets require a long lead time.
Main Specifications
Product name | The collets and collet nut for the Spindle No. 5 φ2.0 |
---|---|
Part number | 5009009 |
Related Products
-
KONAN CP691 Pneumatic Cylinder Long-stroke Cylinders (Standard)
-
TONE 6A-B Budd Wheel Socket ( For Inner Nut Of Truck Wheel)
-
SANKO ELECTRONIC LABORATORY Moisture Reading Checker
-
TERAOKA SEISAKUSHO 7642 #25 Transparent Double-coated adhesive film tape
-
KETT ELECTRIC LABORATORY VZ-390 Printer
-
Nakatani Kikai NG75A‐DRG Disc Grinder (Straight)