Japan, UHT CORPORATION
UHT Corporation The Collets And Collet Nut For The Spindle No. 5
Made in Japan
Manufacturer: UHT CORPORATION
Model: The Collets And Collet Nut For The Spindle No. 5
The collets and collet nut for Spindle No. 5.
The 6.0-mm collet is included in Spindle No. 5 or Kit No. 5 by default.
The collet’s nominal diameters are the maximum dimensions to be held.
Note that when the difference between the shank diameter and the collet’s nominal diameter increases, the runout will also increase.
For example, the 6.0-mm collet can hold the 5.5-mm shank, but not the 6.3-mm shank.
The accuracy will become low with the 5.1-mm shank.
Use the 5.0-mm collet for the shank diameters of 5.0 mm or less.
Main Specifications
Product name | The collets and collet nut for Spindle No. 5 |
---|---|
Part number | 5001119 |
Related Products
-
Watanabe RSC [sheathed RTD] Metal Connector Type with Lead Wire
-
Watanabe WRBC-DIO8□F Digital input/output module – Remote I/O
-
Vessel No.WSA “GO-TAN” (Hard Forged) Tilt Short Socket
-
Daiichi Keiki PK Diaphragm-type Pressure Gauge, Flange Type
-
KONAN NH-NDK Series Refrigerated Air Dryer (After-cooler Built-in Type)
-
Tokyo Keiso FC-100 Liquid Flow Control System