Japan, Shimizu
Shimizu Easy Double Point – Tip tool
Made in Japan
Manufacturer: Shimizu Manufacturing Co., Ltd
Features
Raku double points (17H, 21H, SDS-max) have sharp edges
- Since the edge is sharp, it can bite and bite into crushed objects well, and the improved crushing capacity improves work efficiency.
- Because the edge lasts for a long time, it can be used for a longer time than conventional products.
- When regrinding after wear, the amount of grinding is small, and the edge can be regenerated in a short time.
Features of Raku Double Point (excluding SDS-plus axis)
Raku Double Point has our own special alloy tool steel joined to the tip by friction welding. In addition, the shank is made of structural alloy steel, and is evenly heat-treated and shot-peened so that the impact is fully transmitted to the cutting edge. If it wears out, it can be polished with a normal whetstone. Forging is also possible in the same way as for ordinary products. Be sure to use oil for quenching.
*SDS-plus uses chrome vanadium steel
Usage
Concrete chipping work
17H Raku Double Point
| part number | size | JAN code |
| 10000 | 17H x 280mm | 401016 |
| 10001 | 17H x 365mm | 401023 |
| 10002 | 17H x 450mm | 401030 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
21H Raku Double Point
| part number | size | JAN code |
| 10003 | 21H x 320mm | 401047 |
| 10004 | 21H x 450mm | 401054 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
30H (8900N) Easy Double Point
| part number | size | JAN code |
| 10005 | 30H x 420mm | 401061 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
30H (8600N) Easy Double Point
| part number | size | JAN code |
| 10006 | 30H x 310mm | 401078 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
SDS-max Raku Double Point
| part number | size | JAN code |
| 10061 | 18Φ×280mm | 401160 |
| 10062 | 18Φ×365mm | 401191 |
| 10063 | 18Φ×450mm | 401177 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
SDS Plus Bullpoint
| part number | size | JAN code |
| 10132 | 10Φ×250mm | 401351 |
| 10166 | 10Φ×350mm | 401382 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
Related Products
-
U_RD CTL-5-V-Z AC Current Sensor
-
Oasaka Taiyu Hydraulic tilting bench Tilt Rail Lifter
-
Hammer Caster 405P Decorative Chromate Coated Caster
-
Mirai Kogyo DPRY-50G Drain Piping Expansion Joint (Different Diameter 45° Y)
-
TERAOKA 7055 0.03 Transparent Double-coated adhesive film tape
-
Vessel No.VJ-3 Torque Adapter
REQUEST QUOTATION
PAYMENT
LINK
