Asahi Weldex, Japan
Asahi Weldex 750KP,950KP Positioner
Product Made in Japan
Manufacturer: Asahi Weldex
Model:750KP,950KP
Positioner 750KP,950KP[ Rotating Jig Machine For Welding ]
Diverse Load Lineup
Specifications
750KP
| Maximum Loading Capacity table horizontal 0 degrees | 750kg |
|---|---|
| Maximum Loading Capacity Table vertical 90 degrees (center of gravity position 100 mm from table surface) | 350kg |
| Turntable Diameter | Φ660mm |
| Turntable Tilt Angle | 90 degree |
| Power Supply | 200V three-phase |
| Electric Motor | 0.75kW |
| Turntable Rotation Speed (at no load) | 0.85 rev/min |
| Table Tilt Method | manual |
| Allowable Welding Power | 600A |
| Method Of Operation | foot switch |
| Installation Area | 840×430mm |
| Weight | 418kg |
| External Dimensions | 970(W) × 660(D) × 650(H) |
950KP
| Maximum Loading Capacity table horizontal 0 degrees | 950kg |
|---|---|
| Maximum Loading Capacity Table vertical 90 degrees (center of gravity position 100 mm from table surface) | 400kg |
| Turntable Diameter | Φ900mm |
| TurntableTtilt Angle | 90 degree |
| Power Supply | 200V three-phase |
| Electric Motor | 0.75kW |
| Turntable Rotation Speed (at no load) | 0.56 rev/min |
| Table Tilt Method | manual |
| Allowable Welding Power | 800A |
| Method Of Operation | pendant remote control |
| Installation Area | 960×570mm |
| Weight | 730kg |
| External Dimensions | 1190(W) × 900(D) × 890(H) |
Related Products
-
Howa ν-cera Series Of Ceramic Green Sheet-related Equipment
-
SANKO ELECTRONIC LABORATORY PM-PA Standard Probes For MR-200 (Mortar, Plaster)
-
Horiuchi Tie Rod Type FA Single Rod
-
SHIGEMATSU DR77SR Dust Respirator
-
Shinwa 10297 Carpenter’s Square Flat Hard Chrome Finish 30 cm
-
Sawada KS-N type Gauge valves for level gauge
