Japan, SENSEZ
SENSEZ MTI Terminal Box-type Pressure Sensors
Products Made in Japan
Manufacturer :SENSEZ
Model :MTI ( MTIN-100KP,MTI-020KP,MTI-050KP,MTI-100KP,MTI-300KP,MTI-500KP,MTI-001MP,MTI-002MP)
Outdoor specification / Waterproof IP67 structure
Features
- Terminal box type
- For gauge pressure
- Terminal box type of the “HT/HG series” gauge pressure sensor
- Outdoor specification / Waterproof IP67 structure
- Support of a wide range of pressure media such as water and oil
- Output signal of 4 to 20 mADC from a built-in amplifier circuit
Characteristics
- Terminal box type of the“ HT/HG series” gauge pressure sensor
- Support of a wide range of pressure media such as water and oil
- Negative pressure and compound pressure types are also available.
Specifications
- Accuracy：± 0.5％ F.S. or less
- Output signal of 4 to 20 mADC from a built-in amplifier circuit
- Overpressure：＜MTI＞150% of the rated pressure
Use examples and track record
- Discharge pressure measurement for compressors
- Discharge pressure measurement for pumps
- Level measurement for open tanks
- Pressure control for pure water production devices
- Gas pressure measurement for refrigerators
- Filter clogging detection
Industries where our products are widely used
Precision equipment, semiconductors/liquid crystal, machinery, food/drug production, industrial material, etc.
| Model | Rated pressure |
| MTIN-100KP | 0～−100kPa |
| MTI-020KP | 0～20kPa |
| MTI-050KP | 0～50kPa |
| MTI-100KP | 0～100kPa |
| MTI-300KP | 0～300kPa |
| MTI-500KP | 0～500kPa |
| MTI-001MP | 0～1MPa |
| MTI-002MP | 0～2MPa |
| Model | MTI | |||||||
| N-100KP | -020KP | -050KP | -100KP | -300KP | -500KP | -001 MP | -002 MP | |
| Rated pressure * 1 | 0～-100kPa | 0～20kPa | 0～50kPa | 0～100kPa | 0～300kPa | 0～500kPa | 0〜1MPa | 0〜2MPa |
| Pressure type | Gauge pressure ※2 ※3 | |||||||
| Overpressure | 150% of the rated pressure | |||||||
| Wetted part material | Diaphragm : SUS316L Pressure port: SUS316 O-ring: Fluororubber (standard) | |||||||
| Sealing liquid | Silicone oil | |||||||
| Applicable media | Gas and fluid (media not damaging the wetted part material) | |||||||
| Power supply | 12 to 28VDC | |||||||
| Output | 4 to 20mADC | |||||||
| Load resistance | 600 Ω or less (at power of 24 VDC) | |||||||
| Responsiveness | 5msec or less | |||||||
| Accuracy (linearity) | ±0.5% F.S. or less * 4 (±0.3% F.S. or less) | |||||||
| Temperature characteristics | ±0.05% F.S. / °C or less (0 to 60°C) | |||||||
| Compensated temperature range | O to 60°C | |||||||
| Operating temperature range | -10 to 80°C (no freezing allowed) | |||||||
| Operating humidity range | 35 to 85% RH (no dew condensation allowed) | |||||||
| Pressure connection port | R3/8 (standard) G3/8 R1/4 | |||||||
| Terminal box | Material: Aluminum die casting | |||||||
| Wire outlet | G1/2 Applicable outer cable diameter: 6.5 to 8.0 | |||||||
| Structure | IP67 | |||||||
| Insulation resistance | 100M Ω or more / 500VDC | |||||||
| Withstand voltage | 500VAC, 1 minute | |||||||
| Vibration resistance | 98.1 m/s², 2 hours (X, Y, and Z directions) | |||||||
| Weight | Approx 320g | |||||||
| Impact of mounting orientation (port orientation changed from downward to sideways) | + 0.1% F.S. | + 0.5% F.S. | + 0.3% F.S | + 0.1% F.S. | _ | |||
- We also manufacture compound pressure sensors (gauge pressure of 500 kPa or less).
- Make sure that the operating vacuum pressure is 10 kPa abs or more. (Operating temperature range: 0 -60℃)
- Use a wiring cable for atmospheric pressure correction.
- We also manufacture high-accuracy pressure sensors (accuracy: ± 0.25% F.S. or less).
Dimensions(Units:mm)
Internal terminal block / wires
Model
